AL_V's latest activity

I didn’t loctite mine, just torqued to 80 Nm. There was still remains of dried Loctite on the bolt, not sure if that will do anything...

@Julo EX, I happened to change my front sprocket today. What I found was that the bolt has a shoulder that fits the I.D. of the washer...

what a beautiful and caring customers we are uh? hahaha

Yes, it is an upgrade. Gen 1 had a black plastic inverter cover, that is some cases developed cracks at the mounting bolts. The Gen 2...

As I understand (and I may be wrong) the throttle has hall sensors that sense, or measure the amount of rotation, which send a variable...

I kind of expect low level of experimentation once folks get used to using the throttle and hp/torque characteristics of the Stark with...

Is that on the main site https://starkfuture.com/ ? When you select EX, MX 1.2 or SM in the upper left hand corner, you don't see the...

Highly rec the following setup from Giant Loop moto: - Tail Rack - 4 bolts into fender (GL Tail Rack) - Klamath pack - securely mounts...

Ask SAM for help?

Yes, that's it, and he also showed a little more detail in the last 2 posts of this thread...

I can't find it right now, but there is a thread with photos where a guy did a DIY mount of a plastic case to the fender to carry his...

After looking at this picture, it looks like you may have the washer on top of the spline (at the top), instead of "around" it. So yes...

It's fine, send it!

If all other things are equal, I would recommend the Racetorx, only because one of the banjo ends of the brake line has a bend, which I...

That's great to have those options, but if you want an enduro bike, the EX still seems like the best choice unless it saves significant...