drehwurm68's latest activity

No sure if a connector with some grease spread over it would make for a desiderable photo so I skipped that part - sorry. Michael

Today I went over my new EX and was delighted to find ample of dielectric grease in the connector from the factory (y) Michael

In Europe the footbrake is no requirement thus the bikes just come with the hand brakes. If you want a foot brake here it costs extra...

Over here it is just a formality once you got the CoC (which I have). No inspection of the bike or such, you just take the papers to the...

Interestingly this was only planned for the Husky Pioneer and not the KTM Freeride itself - if they ever make it to the market. Michael

Deliveries are in full swing here (Austria). When I picked up mine from the dealer there were also 3 other guys picking up the EX...

Thanks for the info. If look at one of the above pictures there are the letters "RT" printed on the connector which seems to lead to the...

What happens when you remove the 4 Torx screws - can you pull out the connector? Best case it is not soldered to a board directly and...

I have to say that both pro and against Trump posters here have been very decent in their posts. Far more civilized than the politicians...

The charger in the Varg is labeled as a "C1000" configuration which is not listed in the spec sheet of the EVPT23-32010. But since all...

I feel for you, I really do. Ofc it doesn't mean you all agree with him but sadly the majority of your fellow citizens voted for him...

In the comments he says that one of the buttons on the handlebar switch might be stuck - something that happened on the MX Varg as well...

When you activate high beam, does the low beam turn off or are both lit at the same time? Obviously the most convenient way would be to...

On the European bikes the red connector is used for the required separate license plate lighting. So probably 12V permanently like the...