Erwin P's latest activity

I don't change it all the time, but it might be a bit technical. Oke, but we don't have the torque number of that Yamaha on the output...

No a Yamaha 450 makes around 50Nm at the crankshaft. That is something 3 reduction gears removed from the output shaft. An ICE can make...

I'm not saying E is not superior, but just the numbers are not that wildly more than a normal ICE. And apples to apples... 275Nm is at...

Stark has completely different gearing to other bikes. The final sprocket ratio is roughly the same, but inside the powerplant it's...

So far i had little challenges with starting races. It actually has been quite reliable (1 dead battery and 1 handlebar switch that...

Welcome to the wonderfull world of gearing. Wich is indeed a loss on power, but actually a torque multiplier. There are multiple rear...

Depends in the gear. In first gear an ICE does about the same torque. Especially if you play with the sprockets.

Overheating mostly seems to occur at higher regen modes. Do you remember what regen you ran? Also with taller gearing i feel like i'm...

The rear sprocket is just a KTM one and can be found all over the place.

I just hope their SM wheels will be as cheap as the MX ones. That would completely ruin the KTM SM wheel market. As far as i can see...

@Karinshi 17' or 18' wheel is the difference here ;)

That was what we were missing on the Varg, i was a bit low on power :ricky: I don't care if it could do 120 hp, my arm can only do...

It only touches fot the first km ;)

Correct the reading for different sprockets.

15 does fit on the MX.