Recent content by Fog 25

Put it crawl mode then the rear wheel roll backward. You can also prevent it from rolling backwards with the left-hand rear brake

@pollenface do not forget to get a referral from a Stark Rider before you go to the dealer or order don’t wanna pass up the $300 in parts credit.

Just take the charger out of the stand and put it in a backpack and take it with you. Ask the track if it’s ok to use a plug for power.

The Story of Stark.

Order a screen replacement from AliExpress First hit the edge of the screen with a hair dry to loosen up the glue. Use some Alcohol to loosen the glue. Pray off the broken screen Once the screen is free unscrew the ribbon from the screen and I put some tape on the connecting port to keep...

@tymck7 Keep the foot brake and add the hand brake with a Clark adapter mind works great. Just get the left hand master cylinder and stock hydraulic line and have shortened up.

Thanks went back and corrected.

I always use the German torque specs “Gutentite” If you don’t want to use German torque specs I would use the torque specs that Bryan posted.

You can buy a Stark for the same price.

I use Starks track map for one day at my local track before the phone updated and I lost it. Work petty good, set a start point and it displayed each lap with lap times, counter for laps and fastest lap in the session. it recorded all the laps in your ride stats. I didn’t get to use the trail...

Try to red the font size on the phone. Might be able to get full screen.

Used the bolts with washers cut up a small plastic bucket (sides) for the cable protection. No need for silicon.

Has anybody replaced there screen on the Phone? If so, does the new screen come with adhesive on the new screen? If not what adhesive did you use?

E talk starts at 21 minutes.

@Philip . Check out how quick this has has is https://www.instagram.com/reel/DAUpYaiIoix/?igsh=MzRlODBiNWFlZA==