Johnny Depp's latest activity

In the end you could compare it to the rear end of the engines, since those are a bit further away from the "power source" and run...

After riding in mud, there has never been any there, it stays in the fender area. Being at the bottom, dirt will fall out.

That is something i think i will do to my SM setup. In MX/enduro it will become a mess i think. Along with removing my bashplate from...

interesting. THX.

Easy with a hole saw bit. 15/42 with the axle all the way back.

Got a picture?

I drilled 3 big holes on each side of the side plate bottoms. The cooling fan came on way less and stayed on shorter. SuperMoto gearing...

Well it does have cooling problems in SM. However that have little to do with the powertrain, but more the battery. Especially when...

I see that 60C as well on my powertrain and it does not bother. Has done that for almost 2 years, also with cold weather in the sand. I...

The Stark was build in Spain, where high temperatures are common. And 140 Fahrenheit is just 60deg Celsius. That is nothing for an...

You are on the wrong path. The air humidity has a very little effect on cooling properties. Q=m*cp*Delta (t). Where cp ist the specific...

I am not sure if you are chasing something that is not there. I would be asking some motard riders what they do to beat the heat, they...

Does anyone know the id/od of the rubber coolant hoses being used on the EX? Looking to do a complete cooling system relocation with two...

Fantastic. The first big step into the big leagues. Good luck team!

Stark going full Phineas T. Barnum, there is no such thing as bad publicity...