VINSANITY's latest activity

Thanks for helping out with this - I think I will contact JT sprockets to see if they can find a compatable sprocket - I street ride 50%...

I asked Derek if he could get a 15T sprocket, he didn’t think there would be enough demand, basically said no.

Interesting - I have a 96volt build with the QS138 motor - my current gearing is 14:46 and it still over revs at mid throttle (which...

One more thing, just visual observation but you motor sprocket appears to high relative to the swingarm pivot - do you have a way to...

Where did you get the 15T front sprocket and is it 520 chain. Also nice work

I had a lot of set up problems with the FarDriver ND961000 where it would intermittently cut out - if you are going 96 volt recommend...

My experience is you have to ride one of these conversions to really understand how well they perform, low center of gravity, super low...

Interesting build - what is your battery specs - also how does the hub motor perform, top speed and is capable of off road

For the Honda frame I would be curious if this shape at 9.5 inches wide would be more capacity than what you are proposing. If you...

That’s very clean, had a real close call on range recently so this is a potential solution. Can you share the outside dimensions and do...

Recall the EBMX X9000 V3 has increased voltage and other improvements vs V1 or V2. The older versions maxed out at 72 volt I think. I’ve...

Also the QS138 V3 has all kinds of power and I have abused it pretty good in 100 degree weather, so far no issues with about 1000 miles.

I built a 96 volt bike with the ND961000 controller and Amorge 96 volt 45 amp/hr battery (molicel p45). The power is perfect, you will...

Very nice, the Don Cox conversion really works well, like you said very low C.G. - battery can be swapped pretty quick and lower weight...

Totally agree, Sur Ron, Talaria are going after the biggest target audience and building good products that younger people can afford...