Search results

You should be much better off on that end of the country. The majority of the support for these bikes is over there. Good luck and keep us posted!

Here is some reference information for wheel bearing replacement. There was a previous discussion on the front bearings HERE. Several members have had what I would consider premature wheel bearing failures now, the causes are debatable, but this information should help for sourcing the...

From what I’ve seen, 35 will usually follow 36 if it goes on long enough. We really need to see a screen shot of the battery graph in MultiTool to evaluate the extent of your problems.

Since you guys are in our neck of the country, check out this thread and see if it’s anything you’d be interested in. Northeast Alta Rally

Onelapper saves the day!! Glad to hear it was something simple! Nice!

It’s hidden, you have to go to the top and enable the show hidden files option.

There was apparently an issue that triggered a false positive for this code, I wouldn’t be itching to tear it apart just yet. Any of our Alta crew able to comment? @Rashid510 @Judaslefourbe ?

That’s for the leveler only.

I think it’s reasonable to assume a subframe could be fabricated to do this, and at worst if some sort of custom seat pan had to be created to make it all work that’s not terrible either.

This is a misconception that we are continually trying to correct. Check out this thread; Clarification on standard vs. rapid chargers

Keep in mind we are taking our best educated guesses here with help of a few former Alta employees. Having said that, the thought is the problem might be in the charge port itself. I’m told the port on your husbands 17 MX is interchangeable, so you could swap that part from his bike to verify...

If you haven’t yet seen, we did have someone make us some of the front sliders. Hot Foot Alta Redshift Front Chain Sliders are here!

Both my fast chargers the fan runs continuously. Never once have I seen the fan shut off during the charge. Not trying to dispute anyone’s claim, just stating my experience. Glad to hear you got yours fixed F451!

:) Bear with us, you’ve come to the right place to figure this out. I have a hard time keeping up with all the acronyms myself... Roughly when did you have the firmware update done? We will have to try and confirm you have the very last one they put out. So your battery pack is currently at...

If you are using a rapid charger, and if your husband has a standard charger for his 17, have you tried it?

Not sure if it’s necessary relevant, but what charger are you using?

That’s a new one as far as I know. Here is a list that was previously posted; @Rashid510 and @Judaslefourbe can probably shed some more light on this one.

The charger fan should run the entire time except at the very end when it’s balancing. Unfortunately it sounds like you have a problem.

I wouldn’t worry about the washing part. Just use common sense with pressure washers. I use a cheap electric pressure washer myself. The pressure isn’t crazy so I’m not blowing water past seals, but it’s enough to get the job done. There have been a few guys, @ElectroBraap and @OneLapper...

F451, glad to see the Alta is working well for you. Neat pictures! Privateer... yikes!!! That’s wild!