Kiwi_Swede
New member
- Likes
- 3
- Location
- Sweden
So I finally got the roller for my son’s crf150 build.
A little different this one with some extra challenges.
My son has cerebral palsy and can’t use his right hand.
So will need left hand throttle and left hand front brake.
I’ve converted ICE bike throttles to left hand before so will use one of those and a cable throttle converter.
Qs138 v3 70h and nd72680 is the likely plan and an Amorge battery that fits and a reasonably priced cell pack. Unless anyone says this is a poor idea!
Should be a good project for a 13yr old to spend a few months in the garage.
Will be looking for tips as we go, (and I hope to start a ktm 450 build at the same time next to his)
A little different this one with some extra challenges.
My son has cerebral palsy and can’t use his right hand.
So will need left hand throttle and left hand front brake.
I’ve converted ICE bike throttles to left hand before so will use one of those and a cable throttle converter.
Qs138 v3 70h and nd72680 is the likely plan and an Amorge battery that fits and a reasonably priced cell pack. Unless anyone says this is a poor idea!
Should be a good project for a 13yr old to spend a few months in the garage.
Will be looking for tips as we go, (and I hope to start a ktm 450 build at the same time next to his)