EX handlebars

[WoodsWeapon]

Installed a set of Twisted Engineering KTM bend carbon fiber flex bars on my EX. The bar height is the same, but the sweep is less drawn back and feels much better. I was surprised to find the wires run inside the bars, but it’s no big deal to get them out and run outside. Also the main control switch has a peg that keys into a hole in the bars so it doesn’t spin and needs to be ground off, again no big deal, but end result is much better.

 

[Philip]

I was surprised to find the wires run inside the bars, but it’s no big deal to get them out and run outside.

Most of us have not seen this wiring inside the bars. Could you post pictures?

 

[WoodsWeapon]

Didn’t take any during photos, but here’s the holes. The second pic is where the control switch pegs into.

 

[restarted]

Didn’t take any during photos, but here’s the holes. The second pic is where the control switch pegs into.

View attachment 13789

View attachment 13790

Could you share some pictures of the control switch ground down? I want to swap out bars as well but thrown off by the peg

 

[restarted]

Also would love a pic of how the wires look run along the bars, thanks!

 

[WoodsWeapon]

I’ve gotta pull the bike out of the van tomorrow and will get pics of both in afternoon.