WoodsWeapon

I'm not sure what you mean? You would want the red part in my picture right? So the topside? That is different between both because the...

You can anneal the copper washer by heating it with a torch and letting it cool to room temp. Probably overkill but that’s the correct...

KTM wheels have not changed in atleast 20 years, I think 2003 was when the current hub was first used.

We get it you hate the damn thing. Do you need my adres to drop the thing off? So far i had 1 faillure in over 1,5 years. Not too bad...

It just slides off. It’s currently held in place from the friction of the rubber boots seated in grooves.

I don’t know why all the complaint about the bikes weight? 2 minutes of research time would have clearly educated you.

https://www.enduroplate.com/ I used this on my 500 and will be transferring it over to EX, it’s not the cheapest option, but it works...

I’ve gotta pull the bike out of the van tomorrow and will get pics of both in afternoon.

Yesterday as I was sitting at the van between rides, the kickstand sunk into the ground and from the sideways/inward pressure cracked...

I’m only a few days into the Stark experiment, but I believe after changing settings you have to tap the floppy disc in the low right...

Dealer told me last week when I picked up, the horn and brackets are coming later.

Didn’t take any during photos, but here’s the holes. The second pic is where the control switch pegs into.

I have number 242 in northern Illinois, but my frame is tagged as 2024 model.

KTM makes an add on bracket to make them closed and run from guard to handlebar for mounting. They’re thick heavy duty plastic, and very...

Installed a set of Twisted Engineering KTM bend carbon fiber flex bars on my EX. The bar height is the same, but the sweep is less drawn...