Kurlon

That's two 110v phases though, if the charger only operates on single phase, you're capped at the 110v limit of 3.5kw.

Ya know, I'm OK with clubs / orgs not using freaking Facebook as their primary means of getting official information out there. Having...

A charger, for a dirt bike, that can't be exposed to dust or humidity... Nice to see a faster 110v charge option for the US though, but...

Sadly requires 400v three phase so... no joy for US folks.

Part of the reason 16.5in front rims are popular on sumos, more caliper to spoke clearance. Also, I did the exact same thing to a Brembo...

Cut the fork guards for clearance, we've been doing that for years on pretty much every converted dirtbike, it's normal. This is...

That... is not what I was hoping Test 3 would be. I was hoping it was going to be extreme low temps after the high temp testing.

If your wheel crosses to a common application, Rebel Gears can usually cut you custom rear aluminum sprockets to whatever tooth count...

Good catch, so 17mm confirms it's the old Honda 50 pattern at least. I know lots of places that do custom rear sprockets, I never found...

Boy that sprocket screams Ye Olde Honda pattern to me, and it would make sense given how many Honda 50 pattern motors are made in China...

And this is why I never was a fan of shorty levers either. Just move the masters, keep the leverage.

I've rocked full large course built sumos, clamps, fully worked forks, shock to match, had a shortened swingarm for a bit, etc, and I...

Seeing it getting VERY flexy on a landing didn't inspire confidence, nor did it throwing chains from swingarm flex?

In the US, with other brands normally the warranty clock wouldn't start ticking on a demo until the bike was actually sold and MSO/Title...

...wouldn't be my first over-build... :D My first race bike was a CRF70, that at the end I did regular big bike trackdays on after...