Recent content by Anders

Is there anyone that know of a file for a EX headlamp cover, like the one in the picture? I grabbed those images from Etsy. I could off course buy it there, but the shipping is more than the cover... Better to print it locally The idea is just to save the lamp from damage during summer. I could...

I feel that this thread is becoming a sort of list of suppliers. Carapaks also has an offering, 10mm lower and 20mm further back.

Would it be possible to run the RaceChrono lap timer in such a picture-in-picture window? I use it for recoring lap times during training, and don't want to pay the extra fee for the Stark pro option. I haven't tried it yet on the Arkenstone, but it seems to run quite comfortably in split screen...

There are at least the NiceCnc ones. They are not adjustable, but they are lower by 5mm I think. But they seem to be prone to mud or snow sticking to them, they are not open enough (in my opinion).

I contacted MX Guards regarding the Hardline-X pegs. They are in stock, but they are in the same positions as the OEM pegs. No lowering. So then I am more inclined towards buying these MX711 pegs which can be ordered with lower / further back as an option. But they don't have replaceable teeth...

Thanks, these are interesting! I have never heard of Hardline-X before, they didn't pop up during my googling. This is just what I want (I think), aluminum footpegs with replaceable screws instead og titanium or steel footpegs with sharp teeth that eventually gets dull. On my previous Gasgas...

I did a race on Saturday, and the recording from that session is just rubbish. I guess that is why I deleted the previous run as well, it doesn't show up in a way that is recognizable. Is there something I have to adjust / turn on to get correct history ?? Will it disturb the history collection...

I think I'm going to buy a set of footpegs for my EX. Some vendors offer an option of lowering the pegs e.g. 5mm. On my Gasgas, there are two positions, and I have always used the lowest position of the pegs there with no ill effects other than perhaps hitting some obstacles a bit more often...

I am still on 1.6.0. I checked for updates last Friday, no updates available according to the Stark app. App version is 2.8.4. On the other hand, my bike has been inside my workshop most of the time. There, I have no Wifi and the 4G coverage is not the best. Perhaps I should try to check for...

I was out training at th local enduro loop on my EX the other day, and when I came back, I presume there was a track of the ride in the history on the app. There are all sorts of short, unimportant "mini" riders in the history (from riding the bike from my workshop to the car, from the car to...

+1 to different pads. There are also differences between different disk/rotor materials. I have no first-hand experience regarding Varg, as I run my Varg on OEM pads and disks and so far, I have ridden it less than 10 hours and only in snow in sub-zero conditions. I have installed the Racetorxs...

That too bad. But his idea for mounting the link guard above the skid plate could be an idea to copy, if you feel that your solution will get ripped off.

I applaud DIY solutions. However, Dowatek is actually selling something like this: https://www.dowatek.de/en/stark-varg/245/plastic-link-guard-stark-varg-mx-sm-and-ex?c=358

For what it's worth... I have so far only ridden my Varg for EX 5-6 hours in winter conditions with snow. Some of it quite loose snow / powder. On my ICE Gasgas I feel that the front wheel wanders about under such conditions, and I generally feel unsafe. On the Varg, I feel that the front wheel...

The warranty period can be prolonged 2 extra years for $999 according to Sam. If the spec of the demo bike is the same as you prefer, I would get the demo bike at the dealership. However, if the spec (apart from 80hp) differs too much, then the end price could very well be similar or even higher...