Recent content by JJ2

correction: the shock absorber lower rubber guide is the bottleneck for the xtrig and Locking ring installation. Normally you have to dismantle the shock, i have ground the diameter of the ring at one point, so the xtrig slides over the complete shock, especially over the rubber guide ring. For...

It is impossible that the gear ratio is the reason, because I have both Stark MX and EX geared with 13-47. The MX is 14-47 original in Europe and the EX is 12-48. Even pitches with 114 chain links are not good for wear, so I always use odd pitches. And 12 teeth on the sprocket is not enough...

Oil in both is new 75W90. Similar chain and gearing. should sound nearly same. But EX is louder. And smells a little burnt after a harder ride. I have to check again.

Stark would like a sound video. I'll do it, I don't think it's that easy, it should be without wind noise. Or I don't do this when driving, but when stationary, maybe even just the engine without chain/drive. The howling occurs from about 3,000 revs

the locking ring is the bottleneck

mine YZF is from 2020, you would have to see if the shock absorber is the same. But the important thing is: I cut into the lower ring so that the Xtrig ring can be easily installed without removing the shock.

I have a Varg MX and an EX. The new EX has a distinctly different engine sound, it howls more and is louder. Especially audible at constant medium and higher revs. It's definitely not the transmission or other noises. Gearbox oil change after 3 hours, but still the identical howling sound. My...

the plug is already connected to 12V before the headlight, so everything that has to do with the headlight and the indicator is operated with 12V.

…..but I can not find this type of connector

I would like to be able to switch the lights on and off on the Stark Varg EX. Unfortunately, due to EU regulations, the daytime running lights must be permanently lit. The connecting cable is a 5-pin HIGO plug, three pins are for the indicator and two thicker pins are for the light. Has anyone...

The Husqvarna handguards probably don't need any modifications at all and should fit perfectly. In my case, however, they were previously fitted to a Yamaha YZ450F and came from there to the Stark. That's why I had to make a small modification to the screw length. But only because they were on...

Yes, they should fit with small mods. I have the same

same problem? https://electricdirtriders.com/threads/powertrain-failed-and-making-horrible-sounds.3594/

New Varg App update: 1.0.180 (392) today sep.20, 2024

My experience with Stark service has been fantastic. My charger stopped working and within 3 days I had a new one by express delivery. Sensational. No silly questions, no arguing and endless waiting for decisions and dispatch of parts. One email and 3 days later a new charger arrived. Absolutely...