rs911's latest activity

I had the same problem this morning. At first, I thought it was a problem with the heat soak. I let the bike cool down for at least 10...

Similar Issue with my Varg EX. Mine was shutting down (red LED) mostly when I turned left, then all the time. I tracked my problem down...

Here are some of their solutions applied to some recent models, @11:32 Notice how the cooling system should be made in such a way that...

I did some calculations on the bikes powertrain, bearings, electrical and mechanical losses and a simulation of the torque, motor rpm...

I was scratching my head but I never would have guessed I think 😅 Never tried them. I rode my old 1098 Streetfighter with SC tires. I...

So far, I've only done a very short 15-minute test with them. I'm still recovering from my broken vertebra (it's been two and a half...

Now that i see its not limited to any certain speed, the real enemy hear is obviously finding better cooling alternative for the...

So i borrowed a brand new garmin gps from a friend and again with 15t/45t sprockets and 17” supermoto setup the motor cut power at...

The bike runs out of cooling really quick even with 15/44 gearing on larger road courses. I have done a couple trackdays on my EX while...

I wanted as much traction as possible with that high-torque bike, and the change was not difficult/tricky at all in the end. I don't...

I understand, if you want I can share it to him 😉

I didn't do anything out of the ordinary. I installed the sprocket on the hub without any spacer and mounted the tire myself. No...

I always loved the SXV 😍 Installed last night, I contacted several guys who have supermoto MX. At first I thought about going with a...

This bike just seems like something I'd also like riding..

Every 1 tooth change at the front is equal to approximately 3 at the rear. 15 does work although really tight. I asked an LLM to work...