Steg Pegz!

Philip said:

I think I want to try them... I do not feel as secure standing up on my Stark as I do on my Alta. But I have a Guts Racing RJ Wing Seat waiting to be installed first. It is the same idea but larger and softer bumps higher up at your knees rather than your calves.

Click to expand...

fully said:

SP93 STARK VARG STEG PEGZ

SP93 STARK VARG STEG PEGZ STANDARD OR FURTHER BACK? If you are like the majority of Riders that stand on the arches of your feet on the foot pegs, you will want just the standard Steg Pegz. However, if you ride on the balls/toes of your feet, you will want the further back StegPegz. The rubber...

stegzmoto.com.au

They don't make Alta pegz. But check this out for DIY
Put them behind your boots. Not squeezing them.

View attachment 11528

Click to expand...

happyinmotion said:

Stegs for my Stark arrived yesterday. I'm yet to test ride them, coz life, but without them my elbows are getting trashed. So here's hoping they lock me to the bik

Click to expand...

Magoo69 said:

I was wondering when StegPegz would be available. I‘ve used them for many years, I love them. They weren’t available when I got my Varg 7 months ago so I made my own.

It was very easy and cheap( less than$20) The rubber pucks I found on Amazon. The hardware was simple.

I cut a +/- 2” front to back slot in the fender to allow for adjustment. I then put a small aluminum backing plate with a matching slot on the inside of the fender and used a slot nut With an Allen bolt.

The Allen bolt is nice because I can carry the small Allen wrench with me and make adjustments in the trail.

I like StegPegz closer in the tight technical trails. In the fast wooped out areas I like them further back.

I’d incourage anybody that hasn’t tried StegPegz to do so. They take a bit to get used to but once you do, they are great. They lock you in to the bike and dramatically reduces fatigue, especially with the Varg in the higher HP modes.

Happy trails!

View attachment 11612

View attachment 11613

Click to expand...

Magoo69 said:

Hey there,

I purchased the slot nuts and rubber pucks on Amazon. The reason they doesn’t break the plastic is because I put an aluminum backing plate behind the plastic that has a slot in which the slot nut slides in. That way I can tighten the Pucks real tight without breaking the plastic. It would not hold up without the backing plate.

You could probably do it with a big fender washer and a standard nut…the downside of that would be that it would be much harder to adjust.

View attachment 12518

View attachment 12519

Click to expand...

happyinmotion said:

First ride with Stegs today (further back and two pucks) - so different and so much better.

My whole upper body could relax. I spent an hour and a half plouging through rutted sand and piled up shingle. My arms should be properly beaten up. Instead, they're in so much better shape.

I'm sold.
View attachment 11630

Click to expand...