Search results

Yes, it is an upgrade. Gen 1 had a black plastic inverter cover, that is some cases developed cracks at the mounting bolts. The Gen 2 also has an improved charge plug. Just look closely the first time you remove the charge plug cover, there is a button on the bottom to release it.

As I understand (and I may be wrong) the throttle has hall sensors that sense, or measure the amount of rotation, which send a variable voltage or current to the VCU through wires, no it is not wireless. Perhaps @fsfs or another expert can chime in here...

Ask SAM for help?

Yes, that's it, and he also showed a little more detail in the last 2 posts of this thread: https://electricdirtriders.com/threads/portable-charger.4208/page-2#post-48385

I can't find it right now, but there is a thread with photos where a guy did a DIY mount of a plastic case to the fender to carry his charger. It looked pretty well done with some bracketry.

After looking at this picture, it looks like you may have the washer on top of the spline (at the top), instead of "around" it. So yes, loosen it up and center the washer, and re-torque.

It's fine, send it!

If all other things are equal, I would recommend the Racetorx, only because one of the banjo ends of the brake line has a bend, which I think would work better at the adapter on the foot master cylinder. But in the photo, it looks like they are using the bent end at the left hand MC, and it...

That's great to have those options, but if you want an enduro bike, the EX still seems like the best choice unless it saves significant $$ to get an MX1.2 with enduro suspension and 18" wheel.

There is already 12v "available" for the docking station, the radiator fan, and the water pump.

Well, if she needs access to those 3 drawers behind the rear tire, there might be a complaint!

Same here, I guess I meant to ask that to @Toom38

Right on! did you measure the length of the hose they supplied? And how much more was needed? I am just curious...

The kit I installed included a hose that WAS the right length. I don't remember if it was possible to install the new water pump cover oriented incorrectly, but if so, that may be why the hose was too short?

Hmm, it looks like Group #25 is actually group #26, probably starts with group zero?

Yes, you could weld it, but you can also send a photo of the broken bracket to Stark support, and they will send you a new and improved one for free under warranty. Takes about a week to receive it after emailing. And as rafagas asked, what seat is that? link please!

This was promised to us when they first announced their first bike, which is now referred to as MX1. There was no mention then about a subscription cost. So they basically screwed us out of that, but honestly, I don't feel like I need or want it it anymore, and I don't think I would even do a...

As of 8:45am EST it is now available for order: $12,999 or $13,999 for 80hp. Estimated delivery Jan 2.

The video shows up for me (USA) on the Stark YT page. But the Stark page still says "coming soon."