ALTA custom parts - Files for fabricating

[Brillie35]

Me and my brother made some custom Alta parts.
Note this thread: “Factory” bar mounts
Because I am very grateful for all help and information on this forum, i would like to make the fabrication files available.

 

[Brillie35]

Bar mounts:

 

[Brillie35]

Rear brake insert:

 

[Brillie35]

Alta stand:

 

[TriumphTwins]

Awesome!! Thanks for sharing the files.

 

[Judaslefourbe]

You're very nice.

 

[TCMB371]

What is the purpose of the rear brake insert?

 

[Brillie35]

What is the purpose of the rear brake insert?

So you can combine the foot brake with a left hand brake lever.

 

[Silent But Dirty]

Here is the model I made for replacement front fender mount. There is an extra body in there which represents the 2x4 aluminumn tubing I cut it from.

 

[Brillie35]

Skid plate:

 

[zootie]

Skid plate:
Are you making these skid plates now & how much are they if you do. Thank you (I'm located on Long Island, NY)
View attachment 3932

View attachment 3933

View attachment 3934

View attachment 3935

View attachment 3936

View attachment 3937

 

[Brillie35]

I did not start making them for other people.
If i had to make just 1 set, it would be around 200$ + shipping.
I would need to make at least 10 sets to get the price closer to 100$
Thats why i releashed the CAD files, so anyone interested with the right connections can make their own.

If there is enough demand i could make a couple of sets.
The plates itself could all be custom.
With different cut outs, or longer in the front or back.
It is just that i can make the clamps in a larger quantity, and do all the cutting and bending at once.

 

[F451]

I don't want to rain on anyone's parade and I do appreciate people sharing their designs, its very generous, but for those looking for skid plates are you aware that the SXS skid plates are available? Good quality, I love mine, $164 directly from SXS in Idaho.

 

[Philip]

You have to agree though that this custom aluminum skid plate looks very high-end and fancy, especially if you look up close. Some might prefer it just for its aesthetic properties.

 

[F451]

You have to agree though that this custom aluminum skid plate looks very high-end and fancy, especially if you look up close. Some might prefer it just for its aesthetic properties.

Absolutely, its a beautiful piece of work and again, very generous to have taken the time to design it, build it, document it, and share it with all of it. I hope I have not insulted anyone by referencing the SXS plate, feel free to delete my post(s) if they are out of place here. -Eddie

 

[Brillie35]

Hey no problem over here.
It was never my intention to make a commercial profit.
I made them for myself to protect the bottom battery cover.
Which is pretty thin plastic.

The only thing I wanted to make clear is, that if there is a demand.
I would have to make a series to get the price down.

 

[Philip]

How did you set up the extra spring on the rear brake plunger?

His spring looks a bit different, but here is mine:
Fasst Company rear brake return spring on an Alta

 

[Trialsman]

I went about it differently by adding a spring to the top side of the pedal. It works great, and I have it this way on both my EXRs as well as the MX I sold.

 

[maybackgl]

Hey no problem over here.
It was never my intention to make a commercial profit.
I made them for myself to protect the bottom battery cover.
Which is pretty thin plastic.

The only thing I wanted to make clear is, that if there is a demand.
I would have to make a series to get the price down.

If your design also fits the EXR, I would purchase one. So, please add me to your list. Thanks.

 

[Brillie35]

If your design also fits the EXR, I would purchase one. So, please add me to your list. Thanks.

Well, you would be the first one on the list.
So I highly doubt we will ever get to 10 sets.