Alta Redshift MX Wheel Spacers (outside of the hub) wanted

[wildman240]

Hi All,

Neither Warp9 or Liquid Performance has or makes wheel spacers. Does anyone have drop-in OEM spec parts available or measured drawings so I can make some?

I did a forum search but didn't find a previous answer for this question. If there are KTM shelf parts available, please advise part numbers and I'll move along. I'm on my last set. Front and rear.

Thanks!

Todd

 

[Matt]

A little while back someone on the forum places a group order with a machine shop to have some made. I am not sure if there are any left. Otherwise there are non available for purchase. The options are convert the front end to KTM or have spacers made unfortunately.

 

[Matt]

Thread '[Sold Out] Alta Wheel Spacers for AER Forks' For Sale - [Sold Out] Alta Wheel Spacers for AER Forks

 

[wildman240]

Those wouldn't work for me anyway as I have the 4CS forks. I'll have to get out some instruments and take measurements to make some then. Thanks.

 

[Matt]

Whoops sorry

 

[Rashid510]

Those wouldn't work for me anyway as I have the 4CS forks. I'll have to get out some instruments and take measurements to make some then. Thanks.

I have some spare spacers for the 4CS forks in my spares bin I think.

 

[wildman240]

I'm interested in a set. Even more interested in a rear set for the MX spec. I'm reverse engineering a used set so I can make some. Please let me know details if you have either/or. AND a continued thank you for all of your support to this forum and its members.

On a completely different side note...I've never had to replace the 9v lithium battery (have a new one on standby). What happens to the data when the thing goes flat? Should I be making arrangements to access the multitool for a download? Or is that a non-issue?

Looking forward to your reply.

Todd

 

[Rashid510]

I'm interested in a set. Even more interested in a rear set for the MX spec. I'm reverse engineering a used set so I can make some. Please let me know details if you have either/or. AND a continued thank you for all of your support to this forum and its members.

On a completely different side note...I've never had to replace the 9v lithium battery (have a new one on standby). What happens to the data when the thing goes flat? Should I be making arrangements to access the multitool for a download? Or is that a non-issue?

Looking forward to your reply.

Todd

No problem, keep me updated on what you do so I can coordinate appropriately.

Now on your 9V battery - the ARM processor inside the ACM is able to keep the VIN and mileage data safely with a 9V disconnect (remove and replace). Also all the log data is saved on the SD card in the ACM. So overall you should be fine.

 

[Dirt-E]

Agreed, my 9V battery died on me a while back and I needed to replace it. None of the data wiped out even after the battery being dead for some time, so probably not a big worry.