If you have a known bad A or R pack BCU (aka top cover) I've been able to successfully repair 2 out of 3 I've had cross my test bench. As far as I know, I'm the only person actually repairing as opposed to replacing these units. I've also had success repairing failed ACMs, Inverter boards, DCCPs, displays, and BRDs. If you have any questions just text me at 602 752 0083 or email at maxvonauto@aol.com. Note, Oded's bad BCU is working again but with very poor high voltage isolation. Not very safe in this condition.
Mark911 can fix anything, if asked nicely
- Thread starter Mark911
- Start date
- Likes
- 4,213
- Location
- Lake Havasu City, AZ
Awesome, Mark! You are going to get a lot of interest and many replies/requests over the next few years. Is it okay if I make your big announcement into a new thread and make it a stickie?
Making a stickie might imply I'm doing this as a business or for money. So far I haven't considered either (other than cost for parts) and I'm only doing it to help the community and increase our knowledge base. If it becomes more than that I'll consider a formal "announcement" stickie. If it's just an FYI kind of thing then sure, stickie it up!
Trialsman
Well-known member
- Likes
- 600
- Location
- Pittsburgh
I hope never to have to make the call for my two EXRs, but thank you for any of those who do need your assistance. This is a great group.
Judaslefourbe
Well-known member
- Likes
- 876
- Location
- Brisbane, CA
Mark, could you help me fix my marriage? 
Mark, could you help me fix my marriage?
Possibly, We just celebrated our 40th wedding anniversary yesterday!
Redwolf
My dog thinks I'm cool
- Likes
- 1,677
- Location
- Brinnon, Wa.
The magic words to remember are "yes dear" with the optional "whatever makes you happy"Mark, could you help me fix my marriage?
Solves most marital problems.
Judaslefourbe
Well-known member
- Likes
- 876
- Location
- Brisbane, CA
Truer words were never spoken...
Mark, could you help me fix my marriage?
C'mon, your wife is an angel, much like mine.
(Waiting for lightning strike....)
Jayfox, if you're asking me if I can fix a code 36 and the answer is yes.
Jayfox911
Well-known member
- Likes
- 181
- Location
- San Diego, CA
I was asking if you can add the button press to clear codes. Everyone would prefer to not have a code but clearing them easily would be cool.
- Likes
- 2,465
- Location
- Charlotte, NC
A bike in good condition shouldn't produce any codes. Wouldn't you rather get the issue fixed properly rather than clearing the code that is being caused by an existing issue? The code will just reappear eventually anyway.
Jayfox911
Well-known member
- Likes
- 181
- Location
- San Diego, CA
True and yes I would rather have a fully functioning bike.. I guess i am more interested in how he added software code to the bike to add new functions.
- Likes
- 2,465
- Location
- Charlotte, NC
He built his own DCCP using his own firmware that is passing CAN communications to the bike.
Jayfox911
Well-known member
- Likes
- 181
- Location
- San Diego, CA
oh I didn't understand that he made his own.
Don Thuren
Well-known member
- Likes
- 79
- Location
- Bend, Oregon
Seeing these DCCP modules all lined up for surgery, seem's they are a common place needing fixing. Think the DCCP module could be a place that would make my negative isolation be near 250 KOHMS instead of up near 4000 KOHMS like I see on screen shots of other bikes?
Thanks!
Similar threads
| Thread starter | Title | Forum | Replies | Date |
|---|---|---|---|---|
| M | General Mark911 moving to Ohio | General Discussion | 13 | |
| M | General Mark911 is leaving this forum | General Discussion | 12 | |
|
One from the archives - Alta Motors video featuring Mark911! | Videos | 2 |