Power lights

[fully]

Just wondering if someone knows how to completely power down the bike so the red light is off?
I have emailed Stark but no reply yet.
I dropped 4% battery overnight, surely thats not from the bike being in standby (red light slowly flashing)
Any help appreaciated
Thanks
Paul

 

[VargRider1609]

Try pressing both up and down buttons at the same time for more than 12 seconds.

You should see a white flash. That indicates that the bike is fully off.

 

[fully]

Thanks a lot. Took only about 2 seconds to turn off. Did not like that flashing in my house
Stark support didn't want to tell me how to do it.
Is that so they can stay remotely connected to the bikes?

 

[Philip]

Either 2 or 12 seconds depends on the firmware version, according to my dealer. It used to be 2 seconds and now it is 12.

 

[Chaconne]

Thanks a lot. Took only about 2 seconds to turn off. Did not like that flashing in my house
Stark support didn't want to tell me how to do it.
Is that so they can stay remotely connected to the bikes?

You might see a violet or yellow light led from time to time. That means there is a firmware update available. Likely you will go to 12 seconds after that update.

I am not sure if Stark publishes release notes, it would be good if they did, so users could know if a firmware update causes behavioral changes, I only found out about the 12 seconds by holding the buttons down out of hacker's frustration.