Rear Disc Brake Protector

[Kirk]

Happy Holidays! Has anyone found a compatible rear disc guard that will bolt to the stock brake caliper bracket? There's got to be some cross-brand availability. Something like this..

Pro Moto Billet Sharkfin Rear Disc Guard | MotoSport

Thanks

Kirk

 

[ghebinkim]

Rear Rotor Guard

Something like this? Last I checked, the web store was still fulfilling orders even after the cease of operations. Handled by a 3rd party as far as I know.

 

[Philip]

Here, if you are afraid to order from the Alta store:

Rear Disc Guard by Bullet Proof Designs

 

[Kirk]

Thanks man. I've seen that one but it replaces the stock caliper adapter. Was just trying to avoid that. Thought there might be one like the link i posted above. Wondering what KTM make and model would compare to our stock alta caliper adapters.

 

[Philip]

My guess is that all these parts are from the 2014 KTM EXC.

 

[Rix]

Here, if you are afraid to order from the Alta store:

Rear Disc Guard by Bullet Proof Designs

I ran this set up on my fire breathing 2008 KTM250SXF with Bill Thompson's HT Racing bigbore/stroker 350 kit putting out 51whp. Highly recommend it.

 

[Judaslefourbe]

Thanks man. I've seen that one but it replaces the stock caliper adapter. Was just trying to avoid that. Thought there might be one like the link i posted above. Wondering what KTM make and model would compare to our stock alta caliper adapters.

Virtually all dirt going KTMs bigger than 85cc and younger than 2010 or so should have the same RR caliper/wheel setup.

 

[Philip]

older than 2010

Do you mean "younger"?

Do all KTMs have thin rear axles too with 27mm axle nuts? Because I know that most four-strokes have thicker axles with 32mm axle nuts.

 

[Judaslefourbe]

Fixed.
And I believe so. Easy to check by looking at the KTM PN online for different years.
I understand only the front axle has changed (several times).

 

[dgedition]

I’m looking for a shark fin for my EX. Does the bullet proof designs one works on this bike?

I know a lot of the parts on this thing are KTM. I just haven’t had any luck finding an answer on this one. Thanks

 

[bluefxstc]

I’m looking for a shark fin for my EX. Does the bullet proof designs one works on this bike?

I know a lot of the parts on this thing are KTM. I just haven’t had any luck finding an answer on this one. Thanks

Here are the Alta installation instructions and a picture of the bullet proof designs rear disk guard I have on my EX.

 

[Christian]

Here are the Alta installation instructions and a picture of the bullet proof designs rear disk guard I have on my EX.

View attachment 4043

Where did you get it from?

 

[bluefxstc]

Where did you get it from?

Alta store which is dead now. I would like to find one for the front, but haven't found one yet, admittedly I haven't looked very hard either. I would think you could take the part number on the packaging and Bullet Proof could sell it to you or tell you what else it fits so you could order from a vendor.

 

[Christian]

Alta store which is dead now. I would like to find one for the front, but haven't found one yet, admittedly I haven't looked very hard either. I would think you could take the part number on the packaging and Bullet Proof could sell it to you or tell you what else it fits so you could order from a vendor.

Dang. I’ll try that.

 

[dgedition]

I emailed Bullet proof so we'll see what fits on these things. thanks

 

[dgedition]

Bullet was quick! This is the correct sharkfin

KTM Rear Disc Guard 20MM Axle KTM 2004-2020 XC-W, EXC, XCF-W 125-500

 

[dgedition]

Can I add I'm super sad Alta is gone?! I've gone through the whole crop of electric off roaders from electric motion to Surron to Cake. The Alta is by far the best.

 

[bluefxstc]

Bullet was quick! This is the correct sharkfin

KTM Rear Disc Guard 20MM Axle KTM 2004-2020 XC-W, EXC, XCF-W 125-500

Looking at the picture of the one in your link and what is on my bike, the guards look slightly different. Mine doesn't extend up as far on the right side (forward) as the one in the link. May still work, but I don't think they are the same guard.