evh1
Well-known member
- Likes
- 190
- Location
- Montgomery, AL
I plugged up my 2018 EXR with 1100 miles on the battery to my charger on 240v and as I turned the key, the yellow Check Engine lit up on the display. Hmm. As the charge ran its course, I looked thru the manual and forum on display lights etc and nothing in manual or forum ( unless my searches sucked). I checked the charge indicator and it was stuck at 70% for 2 hrs more than a normal high voltage charge time. So, I did what anyone of us would, I rode the piss out it thinking it might help...lol. Rode it it out till it hit rock bottom and pushed it to the garage. Hey! That'll fix/teach it. Plugged it back in on 110v this time and 4 hrs later it charged to 90% and stopped. I turned it all off then on then off and hooked the charger back up to see if it would top off. No joy. I did then notice that the mileage figure was alternating with a short message. Hard to read on my display...I guess due to age...I was able to read the message after pressing the display plastic in some...EEK! Code fuggin 36 !!
So, everything works great but charging is compromised. Do I worry? I can attempt to hook up to my Alta laptop and read....what? I'm a little spooked by the MultiTool deal but can limp thru with the tutorial we have I imagine, but don't know what I'm looking at. With 1100 miles on the bike and the latest firmware loaded, I know I don't want to download the trip log as it might be a week in happening.
May I ask for a step by step how to from the gurus here on our forum? I'll go read all the code 36 links I can find meanwhile. Thanks guys
So, everything works great but charging is compromised. Do I worry? I can attempt to hook up to my Alta laptop and read....what? I'm a little spooked by the MultiTool deal but can limp thru with the tutorial we have I imagine, but don't know what I'm looking at. With 1100 miles on the bike and the latest firmware loaded, I know I don't want to download the trip log as it might be a week in happening.
May I ask for a step by step how to from the gurus here on our forum? I'll go read all the code 36 links I can find meanwhile. Thanks guys