Pavetim
Member
- Likes
- 5
- Location
- Valdosta, ga
Anybody know the size and threads for a 2018 mxr shock bleed port?
Shock bleed port
- Thread starter Pavetim
- Start date
- Likes
- 4,361
- Location
- Lake Havasu City, AZ
I do. Maybe M10x1mm... I need to confirm.
- Likes
- 4,361
- Location
- Lake Havasu City, AZ
Yes, it is.
You can buy an M10x1.0mm to 1/8" NPT adapter at McMaster.com. Or there is also a website that sells shock breeders, do not remember their name, they sell KTM and other adapters as well.
I used a vacuum brake bleeder tool hand pump to bleed the shock on my MX after a revalve. Worked for me as well as a $2K+ WP shock bleeder.
You can buy an M10x1.0mm to 1/8" NPT adapter at McMaster.com. Or there is also a website that sells shock breeders, do not remember their name, they sell KTM and other adapters as well.
I used a vacuum brake bleeder tool hand pump to bleed the shock on my MX after a revalve. Worked for me as well as a $2K+ WP shock bleeder.
- Likes
- 4,361
- Location
- Lake Havasu City, AZ
Don't tell anyone, but I was able to screw in a 1/8" NTP to hose nipple adapter into it directly with some Teflon tape. It sealed well enough to be bled one time. But I bought a proper adapter for it for the next time.
Similar threads
| Thread starter | Title | Forum | Replies | Date |
|---|---|---|---|---|
| O | Freeride electric rear shock | Suspension | 4 | |
|
dirt in the stop bump of the rear shock | Suspension | 0 | |
| J | Xtrig PreLoad Adjuster for rear shock | Suspension | 6 |