For Sale SOLD! 2018 Alta Redshift SM (supermoto)

[929adam]

On board charger lol

 

[rayivers]

Looks identical to my '18 and '19 MXR plugs for the Alta stand-alone chargers. If it were my bike, I'd carefully inspect the underside of the charging plug and it's connections (pics would be great, I could compare it with mine), and if OK I'd then offer money to anyone willing to sell or lend their standard (not fast) Alta charger and try charging it up. With the bike fully charged/balanced, I think a lot more people would be interested.

Perhaps someone here can confirm the Alta standard charger is an Elcon PFC 2500 / TC-619B CAN model, with an Alta-specific? output cable to fit your plug. EV Source apparently carries them with "free custom programming" included, they might be able to source & install the cable and plug too.

 

[Rashid510]

@rayivers the Elcon PFC 2500 is the older charger. Then we used a HK Charger (Elcon as well) for the rapid charger.

Being an A pack at that low SOC, is okay ive charged older packs before with no issues.

@929adam - your bike is not the 68th built bike. Its the 7th. What you are reading is in Multitool which ever time the bike was communicated to. When we built the SM's (or any Altas for that matter, usually the first 10 bikes were deemed for sales/demos/marketing. SM007 was a demo bike especially since the first production SM was SM16 If I remember.

Now probably why the SM has only a DCCP and not an OBC is probably due to is vintage, there might have not been a OBC for the bike and they still needed to demo the vehicle and the off board charger was readily available.

 

[rayivers]

@rayivers the Elcon PFC 2500 is the older charger.

Yes - and to the best of my knowledge, it's the only Alta stand-alone charger that could possibly work with the SM 007 for sale in this thread.

 

[Rashid510]

Yes - and to the best of my knowledge, it's the only Alta stand-alone charger that could possibly work with the SM 007 for sale in this thread.

If a rapid charger exists...that would work too

 

[JP racing]

If a rapid charer exists...that would work too

Maybe would need a firmware update to use the rapid charger?

Where in MA are you? If you on the way-ish from NYC to Boston I may be persuaded to drop by with a charger and MultiTool

 

[rayivers]

If a rapid charer exists...that would work too

Wow, really? With an A pack, and what must surely be version 0001 firmware? I didn't realize the fast chargers were there in 2017, thought they came later for some reason.

 

[Rashid510]

Wow, really? With an A pack, and what must surely be version 0001 firmware? I didn't realize the fast chargers were there in 2017, thought they came later for some reason.

The HK chargers were around 2018-2019, and can be used on older bikes with a firmware update.

 

[rayivers]

OK, that's what I thought. In this situation imo the best bet would be to get the bike fully charged before anything else, and the standard charger's always worked great for me.

 

[JP racing]

OK, that's what I thought. In this situation imo the best bet would be to get the bike fully charged before anything else, and the standard charger's always worked great for me.

Agreed, I would probably try the standard charger and MT first unless a reliable source directed otherwise.

 

[bit_lyyyy]

Just an update, I swiped the bike and once fully charged it pulls. I'm still new to alta so I have no comparison. I tested charging with both the standard and rapid charger and both worked. I'm currently trying to get a CAN adapter or find someone local to me with one so I can check multitool. Located in NYC.

 

[929adam]

SOLD! Enjoy the bike bit_lyyyyy! Good luck with your endeavors!

 

[rayivers]

Great to see this piece of Alta history reunited with a charger!

 

[929adam]

Great to see this piece of Alta history reunited with a charger!

SERIOUSLY!!! I Wish it was my charger it was reunited with but very glad that its gone to a very enthusiastic party!