WP suspension on a Stark

[Miller973]

Has anyone put cone valves and a traxx shock on a stark yet? Currently installing a set on mine.

 

[Foss]

What’s the goal, to make it lighter? I have not seen anyone yet do it in the wild or here. You’d be the first, but I guess it’s possible.

Unless you are doing supermoto?

 

[fred900]

The trax shock doesn't fit. Don't try filing the bottle because it looks close. Don't ask me how I know. I had to open the Botton triple clamps a mm or 2. I used a cylinder Honer, took a while but it worked perfect. I also order a backup bottom clamp just in case. On my Buddies I put the Stark upper fork tube on the wp bottoms but we have KYB conversion 48mm, so looks like the Honing is going to be the solution. On a second note, My Lainer shock fit without no mods. Best suspension I have ever rode on. Lainer said that a bunch of stark owners have been buying them asking for my settings. I did have to take a bunch of rebound out of the shock . I did let a lot of people try my bike. Fork tubes were on the top line, the shock is 10mm longer. I do have a shock for sale if you're interested. I had to revalve the forks a little, I took out one base 10mm thick rebound shim right next to the valve and added to the high speed stack on the mid valve. Mine was a 10_10, swapped a 15mm thick shim from behind the shaft to the top of the high speed stack, and they were perfect.

 

[Foss]

Actually curious what size the KYB forks are on our triple clamps that come from Stark

 

[fred900]

They are the Yamaha ones. You can put the stark uppers tubes any KYB conversion bottoms. I have a friend we did that on his Yamaha 450. Now he has a KTM front wheel and a Brembo brake. It's really awesome.

 

[Foss]

Not trying to hijack the thread but, I am asking for the size if I want to go to an A Kit KYB.

 

[fred900]

Size of what?

 

[Miller973]

Work in progress. First ride on the new suspension this weekend🫣

 

[fedesm297]

I can confirm the Trax shock doesn't fit (the model for ktm up to my 22), the gas reservoir hit the frame and it doesn't allow the top mount to be installed. Big bummer

 

[Miller973]

Try harder fedesm297.

 

[fedesm297]

Try harder fedesm297.

View attachment 11848

How the hell did you mount it?? Did you grind the frame??

 

[Miller973]

How the hell did you mount it?? Did you grind the frame??

I'm not a cave man. I took a pencil grinder to it. I actually coped the chassis, welded in a gusset and a cap for the cope.

 

[Foss]

Which XTRIG triple clamp did you end up using?

 

[Miller973]

Which XTRIG triple clamp did you end up using?

They were off of my 2023 KTM 450 SXF. Required some tabs for the front fender and number plate. And drilling wiring pass-thrus.
I'm about to get a new bar clamp mount machined so I can use the phone again.

 

[Miller973]

Got to test out my new suspension this weekend! Modified chassis held up and the bike felt great!

 

[MadpdXabbott]

I find this thread disgusting and in poor taste.

 

[Foss]

I find this thread disgusting and in poor taste.

I just need something to support an A-Kit lol

 

[Miller973]

I find this thread disgusting and in poor taste.

I find you disgusting and in poor taste.