For Sale WP Trax shock for 2017 Alta MX


B

Ben990

Member
Likes
15
Location
Honeoye Falls, NY
For sale, WP Trax shock for 2017 Alta MX. Includes heavier springs, and stock spring. Very little time on this shock. You will have to grind part of the frame in order for this shock to fit. Includes XTrig preload adjuster.

I was told that it will not work on a 2018 Alta MXR, but I don't know for sure. This shock will also work on a 2014 KTM, but I thought I would list it here first.

$700 shipped.

20181015_155712.jpg

20181015_155556.jpg

20181015_155547.jpg

20181015_155343.jpg

20181015_155347.jpg

20181015_155050.jpg

20181015_155030.jpg
 
Philip

Philip

Administrator
Staff member
Likes
4,214
Location
Lake Havasu City, AZ
You could probably install it on the MXR with the MX linkage, but I wouldn't do it.

Maybe @Mark911 could pitch in, in case he is using the same shock. He is using a KTM linkage on his MX.
 
M

Mark911

Well-known member
Likes
1,123
Location
Corona Ca
I believe It'll work on a 18 if you use a slightly shorter link but don't quote me. I use a 15/earlier KTM TRAX shock and link on my 17 (it's a bit shorter). Yes, the TRAX shock requires a bit of grinding in the area around the upper eyebolt. No big deal, a big file will work fine, just go slow and do lots of fit checks. After I was done my TRAX only had about 15 mils of static clearance and it's yet to rub. The 15/earlier KTM TRAX shocks have more shaft travel than the original 17 WP Alta shock so I compensated with a spacer/bumper.

The complete KTM linkage (rocker/link) will fit right onto the Alta. My experience is with the 2012-15 linkage (I think). It offers a bit more holdup at race sag and isn't as aggressive in the latter part of travel.

BTW- It's pretty easy to shorten a shock eye-to-eye. Any tuner would probably do it for free during a re-valve.
 
You must log in or register to reply here.
Top Bottom