Latest activity

Good advice, thanks.

I did watch out for chargers along the Eastern TET (North-South) in France and found that there are not many, but they are there. If...

2mm out of centre does make it scrub the fork when going through the stroke with a 120 wide SM. Also with hard braking you can feel it...

It is nice to know the E auto industry has found work for former Chevy Vega engineers. It must be a special thing to design something...

Yes I contacted Stark. Stark will respond eventually (it took 4 days last time). The bike is not stolen and is properly registered to me...

I contacted them asking for the purpose of the cable, they said they must provide an OBD Port due to regulations in some countries.

No. I disassembled the water pump connector (removed terminals from plastic housing) and spliced into existing leads, heat shrunk...

I drained 10 CCs of oil out of each fork leg and rode it. MUCH better. Then I drained another 5 CCs (so 15 total) and rode it today on...

I ride in the rain and wanted a high silica tread for that reason, which also tend to be really good dry pavement tires. I bought a set...

They were quite happy to show they were using Molicel (and putting Molicel stickers on race bikes), not sure why they keep it secret...

This is what happened to my MX1. The 3.7 Volt DC battery in the VCU discharged to 2.65 vdc. The bike was dead no lights, no noise...

Guess not.

@svtride Hi, great Idea to hook into the waterpump plug. Did you identify the type of the plug needed to build a harness? Best Peter...

Thanks Michael for the OBDII connector tip. This lead me to strip the plastics off my EX (purchased via dealer) for the first time and...

regardless of manufacturer I tend to shy away from 1st year offerings. the big 4 had their problems too, you just may have still been in...