Latest activity

Merlin, just installed a x9000 on my LB w/ existing domino analog throttle. Found the throttle voltage jumps around and the acceleration...

Like I mentioned I just keep trying and trying till I get the correct voltage in the wizard. It really choppy and jumps around in the...

Merlin, fixed it by replacing the Domino. The first few degrees of twist on the old Domino caused very unstable motor output which...

Update- disassembled the throttle and the potentiometer is sealed plastic with the wires glued in Silastic. I’ll call them and ask if...

Even if they are not the same exact controller just with different heatsinks, I'm inclined to think maybe they're produced by the same...

I rode it last year so it's the Ventus One

Well I rode the Ventus One last year and EBMX didn't have the X9K V3 available. Maybe the newer ones have the V3. The V3 JUST came...

The first controller I used that had the regen throttle was the ASI BAC controllers. I had a far driver and I didn't like it. It...

I really wish fardriver had variable regen. It's such an amazing feature, and fairly simple to encorporate in a controller. I don't...

The QS138 harness will work for I guess any QS mid drive motor as they all have the same connector of the hall sensor and the same pin...

It should work, instead of using the KMH reported by the VCU (and adjusted based on your unit) it simply multiplies the RPM by a fixed...

EX 6241 spotted. It took Stark about 12 months from first deliveries to Varg MX 6000. For the EX it took about 5 months. Obviously...

It should work, instead of using the KMH reported by the VCU (and adjusted based on your unit) it simply multiplies the RPM by a fixed...

Yep 👍

Is the gear ratio function working, and if it is how to calculate the ratio or at least in what range should the value be in?