DonCox

Don mentionned this bike a little earlier in this thread. It is a 2017 KTM 150SX into which he managed to squeeze 20S16P Molicel p42a...

I just came across your post. I have done a lot of KX80,85, 100 and YZ85 size bikes. I use the QS138 70H V3 motor, a Votol EM150SP...

I am building the 2023 Duke 790 bike with a FarDriver. 96V controller. When I finish, maybe I will get one of the Votol EM260S 96V...

Hal I have seen them advertised on Aliexpress, but not by an reputable store. the Siaecosys store, Dun Store, QS Store They do not...

The main reason a lot of us do 72V is because the convenience of the parts. More controller options in 72V, like Votol. They do not...

This battery would easily fit in a YZ85 with a QS138 70H V3 motor. The controller would work well also. I have a 10”x 10” x 7” battery...

To anyone reading about this build, it is now about 3 1/2 years later, and the owner of the first KX80 here that I built this for never...

What are you running up front?

There should be a 1/4" drive torque wrench, and all the torx bits you need.

@DonCox I have two words for you sir Youda Man ! Paperclip into G Thank you!

There are a couple of ways to get out of Park. If you momentarily touch the 2 leads in connector G above it will take you out of Park...

New Connector Kid on the Block or am I just late to the party? just found out about the QS-12 Connector. Quiet a few upgrades over the...

There are so many color changes. Here are the color of the main harness. (Schematic middle) You had the wiring long Harness in your...

First day at the track today. I am absolutely exhausted and the battery had 70% left when I was done xD. All held up well and nothing...

Very true Theo. I have experience, and still have to be very cautious. I have had a few accidents with building batteries and...