EBMX X-9000 v3 - qs-138 - No Wire Harness Available - Build One?

mi_joe said:

I have seen v2 QS138 harnesses available, but have yet to find a v3 one. Hopefully soon?

@fmxxx666 if you have any contacts that would be willing to sell me a v3 harness, please let me know.

Click to expand...

after I failed to buy from Charged Cycle Works I got in touch with "Damon Jackson" Business Development Manager at EBMX
E-Mail: damon@ebmx.com
Told him what I need and where to ship it, then he sent me a payment link, I paid and then I got it shipped from EBMX Global Limited Warehouse in Hong Kong.
Was a little pricy on the shipping as it is international.
But I got rid of the hassle of dealing with Charged Cylce Works

A friend works in Support at EBMX . He said send a request for the pinout to Support@ebmx.com and he can send it to you. He has also asked ChargedCycles when will the Harness be available, he just sent it and is waiting for a reply. Good luck
Don

DonCox said:

A friend works in Support at EBMX . He said send a request for the pinout to Support@ebmx.com and he can send it to you. He has also asked ChargedCycles when will the Harness be available, he just sent it and is waiting for a reply. Good luck
Don

Click to expand...

I emailed them, along with some other questions about harnesses, because I'm still considering using the x9000 v3 in my build. I'll post the pinout when they send it.

MotoxXxMan said:

I emailed them, along with some other questions about harnesses, because I'm still considering using the x9000 v3 in my build. I'll post the pinout when they send it.

Click to expand...

I mentioned I'm doing a diy conversion in a kx250f using a qs165 60h v3, and asked about universal harness, or modding an existing harness, or using the current QS138 harness. This was their reply:
"Please see the attached pinout. When I build custom harnesses, I start with the Talaria harness, or the light bee race harness if I don't want to extend as many wires.
If the QS motor is the hall version, you could also use the QS x9000 V3 harness.
I personally use a QS 138 70h v3 in my hard enduro bike.
Please keep in mind that we don't currently have a tune for the QS165 60h v3 motor..."

attached is the x9000 v3 pinout

You guys rock - thank you!

Have a Talaria harness on the way although I’ll be surprised if the QS one isn’t out soon (although no one seems to have a date).

mi_joe said:

You guys rock - thank you!

Have a Talaria harness on the way although I’ll be surprised if the QS one isn’t out soon (although no one seems to have a date).

Click to expand...

Man I am in the exact same boat on waiting. I waited a year for Electro & Co to release the zapper controller then seen the x9000 v3 release and immediately bought it, and now I am waiting again for a wiring harness.

@guidoxpress GritShift has them: EBMX X-9000 V3 Race Harness For QS138 Motor

mi_joe said:

@guidoxpress GritShift has them: EBMX X-9000 V3 Race Harness For QS138 Motor

Click to expand...

thanks buddy,
i just got one from talaria boys a few days ago. finally on the home stretch !