Aftermarket seat?

Marshall G

Member
Likes
9
Location
Arizona
I am seeing that there are various aftermarket seat covers and foam from Guts and Seat Concepts. Has anyone tried them? I thought I was going to be able to live with the stock seat, but after riding a couple of my buddies KTMs with comfort seats, I realize I'm going to have to go down this road.

Any feedback is appreciated.

Thanks,

mg
 

markanddona

Member
Likes
10
Location
Arizona
I am seeing that there are various aftermarket seat covers and foam from Guts and Seat Concepts. Has anyone tried them? I thought I was going to be able to live with the stock seat, but after riding a couple of my buddies KTMs with comfort seats, I realize I'm going to have to go down this road.

Any feedback is appreciated.

Thanks,

mg
Can't go wrong with SC foam and cover.
 

Raindog

Member
Likes
15
Location
WNC
My Guts seat came in yesterday. It's a really aggressive cover but there is quite a bit more give in the foam.

I wouldn't want to tour on it, but it's much more comfortable than the stock plank.

IMG_20250604_084552644_HDR-X3.jpg
 

Raindog

Member
Likes
15
Location
WNC
It's a complete seat. I have a SC "comfort" seat on my GasGas and while it is wider, I can't really say it's more comfortable.

I dig the handbrake, it doesn't seem to be all that strong but I do very little off-road so it doesn't really make that much difference to me.
 

DirtSurfer

Member
Likes
20
Location
Portland, OR
I have the SC comfort, which needs to be installed... Has anyone done this and have recommendations? (Normally, the seat comes off and is easy to pull the staples to pull off the old and install the new, but w/ the Varg the "back end" is all one piece, w/ no obvious way to pull just the seat pan.)

Thanks!
 

JDZ

New member
Likes
1
Location
Lake Havasu City
I have the SC comfort, which needs to be installed... Has anyone done this and have recommendations? (Normally, the seat comes off and is easy to pull the staples to pull off the old and install the new, but w/ the Varg the "back end" is all one piece, w/ no obvious way to pull just the seat pan.)

Thanks!
I installed the SC comfort the seat pan does come apart from the other plastics and you peel the factory seat cover off and staple new one on. Pull the entire rear end pastics off and you'll see how it comes apart.
 
Top Bottom