EX aftermarket brake/signal lights

[pete12]

These are impressive for their size and wire up easily. They still turn off the center integrated light, but they’re exponentially brighter.
Yoshimura Micro Combo lights I got from Revzilla. Red to red, black to black, yellow to blue and green to white utilizing the stock stalk wires as a harness adapter.

 

[pete12]

1/4” hole and cleared a little inner plastic with die grinder/dremel so plastic nut could secure the light in place

 

[AbnormalWrench]

Very cool, very interested. Any idea on wattage? I don't see any mention of it at Revzilla

 

[pete12]

Very cool, very interested. Any idea on wattage? I don't see any mention of it at Revzilla

No, even yoshi pdf doesn’t mention, just 12v. No signs of it overdrawing. Signals same speed as front.

 

[AbnormalWrench]

Just in case anyone is interested.
Brake circuit = 70 mA
Turn signal circuit = 90 mA
running light circuit = 10 mA
Surprising how little power it takes. I could easily see those numbers being too low for some sensing circuits.

 

[Lasercat]

Installed a set of these yesterday - pretty simple, though the wires are pretty tiny so at least a little bit of soldering skill is necessary.

Initial thoughts are these are way, WAY brighter than the integrated taillight, and way less likely to snap off like the OEM stalks are.

First ride with them and I feel much safer on the street. I would prefer that Stark just made the integrated taillight brighter, but this is about as good an aftermarket solution as I'm likely to find.