OpaTsupa
New member
- Likes
- 4
- Location
- Europe's arsehole
First, some disclaimers.
- I know nothing about how throttle technically works on the Varg. I've not ridden the bike yet.
- I've never ridden Motocross. All my interest and experience is in the type of Enduro that is very different from MX terrain and riding style.
- I'm from the school of CLUTCH = CRUTCH. Throttle control is everything.
To get whiskey throttle, or "Doing a Taddy", out of the way first.
I keep imagining a simple software-rev-limiter that will cut the power if throttle is violently opened in an inconsistent manner. Ideally it would be smart enough not to cut in if riding aggressively, and only when there is an anomaly. That part is likely not so simple to design and implement.
Only time I do a whiskey throttle is when the handlebar is violently deflected by an obstacle, or mid-way trough the crash. It's not a major issue for me even with a lively 300cc 2T, but if technology is there it sure would be nice to have it.
For 'Traction Control' I don't mean just a sensor that monitors rear wheel spin, but the whole connection of engine characteristic, throttle, power delivery at driveshaft, gearing etc.
In my experience with ICE carburate bikes a minute change to any of these parameters (one tooth of the sprocket, one clip of the carb needle, different gasket/head etc.) can make a difference from suffering and fighting the bike to gliding over terrain as if on rails.
I would expect that a machine like the Varg can eclipse all that in terms of control and fine tuning.
Making something that works for every possible terrain and topography is unlikely, but a combination of a good Factory concept with enough end-user adjustability may be the key.
Power delivery that can automatically adapt from high output, continues drive and no wheel spin for a long, choppy hill climb;
Then maybe full power for the flat plateau section;
Then zero power, max engine braking for the steep decent.
That's stuff of my dreams.
So, the question is will Stark focus on developing the best Enduro machine ever or chase numbers flashy numbers like "80HP" that are not so relevant for Enduro?
- I know nothing about how throttle technically works on the Varg. I've not ridden the bike yet.
- I've never ridden Motocross. All my interest and experience is in the type of Enduro that is very different from MX terrain and riding style.
- I'm from the school of CLUTCH = CRUTCH. Throttle control is everything.
To get whiskey throttle, or "Doing a Taddy", out of the way first.
I keep imagining a simple software-rev-limiter that will cut the power if throttle is violently opened in an inconsistent manner. Ideally it would be smart enough not to cut in if riding aggressively, and only when there is an anomaly. That part is likely not so simple to design and implement.
Only time I do a whiskey throttle is when the handlebar is violently deflected by an obstacle, or mid-way trough the crash. It's not a major issue for me even with a lively 300cc 2T, but if technology is there it sure would be nice to have it.
For 'Traction Control' I don't mean just a sensor that monitors rear wheel spin, but the whole connection of engine characteristic, throttle, power delivery at driveshaft, gearing etc.
In my experience with ICE carburate bikes a minute change to any of these parameters (one tooth of the sprocket, one clip of the carb needle, different gasket/head etc.) can make a difference from suffering and fighting the bike to gliding over terrain as if on rails.
I would expect that a machine like the Varg can eclipse all that in terms of control and fine tuning.
Making something that works for every possible terrain and topography is unlikely, but a combination of a good Factory concept with enough end-user adjustability may be the key.
Power delivery that can automatically adapt from high output, continues drive and no wheel spin for a long, choppy hill climb;
Then maybe full power for the flat plateau section;
Then zero power, max engine braking for the steep decent.
That's stuff of my dreams.
So, the question is will Stark focus on developing the best Enduro machine ever or chase numbers flashy numbers like "80HP" that are not so relevant for Enduro?