Exr rear brake light wire and connetion clip question

[Slayer]

Does anyone know the specifics on the connectors and where to get them along with some of the wire used in the rear brake system on the Exr? I purchased a generic pull type brake light switch and it uses the same connector as the as the stock brake wire. Looking to build a jumper to rig my LHRB. Thanks.

 

[Rashid510]

The connector is a Sumitomo 6040-2111.
Amazon or Digikey/Mouser may have the connector (Male and Female).

 

[John Lindemann]

Cycle terminal
http://cycleterminal.com/
These folks sell the connectors, pins and tool you need to match the connectors on your Alta. Looks like they’re out of the office till 1/14/19.
Use the pictures to match your connectors up.

 

[Slayer]

Cycle terminal
Terminals-Connectors-Accessories
These folks sell the connectors, pins and tool you need to match the connectors on your Alta. Looks like they’re out of the office till 1/14/19.
Use the pictures to match your connectors up.

Thanks for the info, might have found them on Amazon, I will see when they arrive. I did get my rear brake light hooked up and working (temporary) and will post a full description once the rig is complete.

 

[snydes]

Another option
2-Way Kit