I planned to charge the bike for a few hours and I always leave the bike in the ON position when charging which I dont think is the proper procedure but I usually come back and turn the key off manually a few hours later, this time I forgot and 5 days later realized this, now when switched to the ON position nothing happens, hopefully its just the 9v battery but not sure where to start?
Left Ignition in ON position for 5 days, NOW bike is Dead, Help!!
- Thread starter Intrazel
- Start date
- Likes
- 1,180
- Location
- South San Francisco, CA
PM sent.
Sounds familiar
JP racing
Well-known member
- Likes
- 57
- Location
- New York, NY
I have this same problem but from overnight.
Left the bike charging and when I came back won’t power up at all
Key switch seems ok
9v battery is 9.23v
Left the bike charging and when I came back won’t power up at all
Key switch seems ok
9v battery is 9.23v
Any updates?
JP racing
Well-known member
- Likes
- 57
- Location
- New York, NY
My battery is now sitting on the bench, I'm hoping someone who has tackled this problem on an A pack will chime in.
For anyone that needs help, please contact Rashid, he fixed my R-Pack, it was the BCU. Apparently a new BCU board design exists that is less prone to failure.
