Hey Guys!
So Fog and I rode some good moto today! On our second motos we got impatient waiting for our bikes to charge and off we went. Fog started with a bar down from full and I was about 75% full...pretty close but not exact. So Fog is a faster rider then me but held back a bit to ride with me. He was riding in Map 4 while I was going as hard as I could in Map 3. Not only were we riding at the same pace, but Fog also has 20+ lbs on me. After riding a good 15 - 20 minutes or so I had to pull off because I was at one bar. A buddy of ours was going to take a photo of us both on a jump and I told Fog I have a flashing one bar so if we are going to do the photo I need to cut the coarse. I asked him how he is doing as he rides in map 4 and to my amazement I look down and he is at half charge on his screen!!! I am now wondering how the heck he was able to conserve so much energy riding in Map 4 at the same pace as I am while I am on Map 3. Anyways, so I cut the coarse for the photo shoot still in Map 3 and my bike was limiting my power to the point I had to give it full tilt to clear the jump. I was confused as to why my MXR is conserving energy...I thought the MX version only cut off power when getting low. Fog said that when the bar is flashing the MXR it cuts power to conserve. First time I rode the bike with a flashing bar so it was news to me. Just a heads up.
As for why my battery is flashing while Fog is at half is baffling me. I know he carries his speed better but this is quite a difference in power. Anyone have any ideas why my battery is depleting so much faster then Fog's? I know he changed his counter sprocket to a 14T. Could that be saving him lots of juice? The track we ride is lower mid to fast pace and some sand sections.
Fog
final gearing 14-53
weight 205ish
Map 4
Me (Fod)
stock final gearing 12-53
weight 180
Map 3
Let me know your thoughts!!!
So Fog and I rode some good moto today! On our second motos we got impatient waiting for our bikes to charge and off we went. Fog started with a bar down from full and I was about 75% full...pretty close but not exact. So Fog is a faster rider then me but held back a bit to ride with me. He was riding in Map 4 while I was going as hard as I could in Map 3. Not only were we riding at the same pace, but Fog also has 20+ lbs on me. After riding a good 15 - 20 minutes or so I had to pull off because I was at one bar. A buddy of ours was going to take a photo of us both on a jump and I told Fog I have a flashing one bar so if we are going to do the photo I need to cut the coarse. I asked him how he is doing as he rides in map 4 and to my amazement I look down and he is at half charge on his screen!!! I am now wondering how the heck he was able to conserve so much energy riding in Map 4 at the same pace as I am while I am on Map 3. Anyways, so I cut the coarse for the photo shoot still in Map 3 and my bike was limiting my power to the point I had to give it full tilt to clear the jump. I was confused as to why my MXR is conserving energy...I thought the MX version only cut off power when getting low. Fog said that when the bar is flashing the MXR it cuts power to conserve. First time I rode the bike with a flashing bar so it was news to me. Just a heads up.
As for why my battery is flashing while Fog is at half is baffling me. I know he carries his speed better but this is quite a difference in power. Anyone have any ideas why my battery is depleting so much faster then Fog's? I know he changed his counter sprocket to a 14T. Could that be saving him lots of juice? The track we ride is lower mid to fast pace and some sand sections.
Fog
final gearing 14-53
weight 205ish
Map 4
Me (Fod)
stock final gearing 12-53
weight 180
Map 3
Let me know your thoughts!!!