Help Needed part number questions

[dirtydirt]

Howdy, I got an EX 2025 (sold in Sweden), and I need to buy some new parts, but since not all spare parts listed on starkfuture.com have a picture, it's kind of difficult to order the right things. Perhaps you have an idea?

I've tried to get hold of stark support, but I only get crickets from them. Quite disappointing to be honest.

I know I need three parts, and one of them is the rear spoiler, SEX1-P-RF-01-R. Right side mount is broken.



As for the other two parts (A and B below), I need help identifying which part number I need.
I think that part A might be the black rear fender (SEX1-P-RF-02-B), but what about B?

The licence plate bracket is in ok condition, so I don't need a new one, but then again I'm not sure since I'm not sure what's included in the "License plate complete bracket (EU)" (SEX1-P-RF-06).



Any help is much appreciated!

 

[DaveAusNor]

The part number for A is correct: SEX1-P-RF-02-B
For B it's SEX1-P-RF-05

My question is; do you really want that thing on the back? It will only break again. When you disconnect those 2 rear blinkers your integrated tail light will function again (rear light, brake light, and left and right indicator).
I would just attach your the metal bracket together with your licence plate to the remaining 2 screw holes you have left on your fender plastic. I'll take a photo of how I've attached mine when I'm at my bike in a few hours.

 

[dirtydirt]

The part number for A is correct: SEX1-P-RF-02-B
For B it's SEX1-P-RF-05

My question is; do you really want that thing on the back? It will only break again. When you disconnect those 2 rear blinkers your integrated tail light will function again (rear light, brake light, and left and right indicator).
I would just attach your the metal bracket together with your licence plate to the remaining 2 screw holes you have left on your fender plastic. I'll take a photo of how I've attached mine when I'm at my bike in a few hours.

hmm, you might b on to something. I did think that the tail protruded a bit too much down. Looking forward to see your solution later. Thanks!

 

[DaveAusNor]

hmm, you might b on to something. I did think that the tail protruded a bit too much down. Looking forward to see your solution later. Thanks!

The back lip of mine broke off in some wheelie loop outs (I blame muscle memory with no foot brake), so I drilled 2 holes closer to the light and attached the plate bracket there. Your existing plastics would probably be fine to test this on while you are waiting for parts. I decided in the end I would only break new plastics again anyway so im happy with how it is. Just 2 screws and I can ride home from the moto track

 

[dirtydirt]

Thanks for the pics, they got me thinking on how to proceed. Going to take a closer look when I get home.
Thanks again!