Stark Varg 3D files
- Thread starter Vegard
- Start date
Jordo57
New member
- Likes
- 0
- Location
- Lancaster Pa
Yes! I want to print the cover for the kill switch for washing
I thought an post of 3d files we could share would be perfect for more people then just me
Please share if you got ideas or files
Jep.
Here you are.
the work is done.
Constructed and attached an 3d printed cover for the front sproket.
Works well and has two effects.
1. the shoelace are safe - and so is the driver
2. noise reduction
details can be found under
electricdirtriders.com
Thingiverse
Here you are.
the work is done.
Constructed and attached an 3d printed cover for the front sproket.
Works well and has two effects.
1. the shoelace are safe - and so is the driver
2. noise reduction
details can be found under
Varg EX has different sound to Varg MX. EX howls more and is significantly louder
On my SXV 550 [...] all I do is pull in the clutch and blip the throttle a few times Thank you for playing high level music without asking for a ticket. When I came home from high school, after I got off the bus, sometimes a guy passed by with an SXV. I paused the CD player, listened to the...
Thingiverse
Here is my Stark Varg model collection on Makerworld:
Stark Varg | Collection - MakerWorld: Download Free 3D Models
I had printed many things there and keep collecting anything Varg related.
Stark Varg | Collection - MakerWorld: Download Free 3D Models
I had printed many things there and keep collecting anything Varg related.
3d printed adapter for the Varg replacing the arkenstone.
Fits like dad in mum.
Just put the iPhone15pro into the backside of the adapter.
Then use the whole thing as it was an OEM arkenstone.
3d files: Thingiverse
Fits like dad in mum.
Just put the iPhone15pro into the backside of the adapter.
Then use the whole thing as it was an OEM arkenstone.
3d files: Thingiverse
Here's a suggestion for a simple 3D print:
Plugs for front and rear axle openings so as to keep the dirt and moisture out.
Interference fit, nothing fancy.
On other bikes I plug the axle with silicone, but on the Varg one side is pretty large and the other is the Hex screw so silicone won't suit.
Plugs for front and rear axle openings so as to keep the dirt and moisture out.
Interference fit, nothing fancy.
On other bikes I plug the axle with silicone, but on the Varg one side is pretty large and the other is the Hex screw so silicone won't suit.
oPAtSUPa - exlusivly for you.
Its a good idea - so i contructed them.
To avoid water you have to put some silicone on it...
Thingiverse
Just two previews are visible in thingiverse - dont know why.
All three files ear included. (Front, Rear, HexaUniversal)
Greez.
Bernardo
Its a good idea - so i contructed them.
To avoid water you have to put some silicone on it...
Thingiverse
Just two previews are visible in thingiverse - dont know why.
All three files ear included. (Front, Rear, HexaUniversal)
Greez.
Bernardo
That's fantastic. Thank you so much. Very kind of you to take the time and effort to design it.
Have you printed it yourself?
I'll see what I can source locally.
Hola!
The iPhone16pro to ARKENSTONE adaper 3d files are online.
For the EX and MX1.2
THINGIVERSE
Bernardo
The iPhone16pro to ARKENSTONE adaper 3d files are online.
For the EX and MX1.2
THINGIVERSE
Bernardo
I made an OnePlus 9 to Arkenstone adapter. My Thingiverse account is new so I cant publish it until tomorrow.
Edit: Link: OnePlus 9 to Arkenstone adapter by TheJ0rma
Edit: Link: OnePlus 9 to Arkenstone adapter by TheJ0rma
DaveBobby
New member
- Likes
- 0
- Location
- Coffs Harbour
Hello
I am looking for a 3D file or 3D scan of the stark varg motor and battery.
I am designing a crosskart and I need the stark driveline to finish my design.
Thank you
I am looking for a 3D file or 3D scan of the stark varg motor and battery.
I am designing a crosskart and I need the stark driveline to finish my design.
Thank you
Just designed/made these, same idea as the Dowa version.
Working perfect on my Stark.
Looking for someone willing to test them:
- that can print them (TPU)
- install them on their stark
- report back to me about fittment
- send me some pics of the installed buttons
If you are that person please send me PM.
Why I made these? I wanted to be able to choose the colors.
And they would prevent buttons getting stuck from sand/dirt.
AL_V
Well-known member
- Likes
- 336
- Location
- Canton, Ohio
Hello,
My son has a 3d printer, and he has printed some button covers for my stark MX1.
A few things we have learned about this:
The blinking LED can be seen through a 3d TPU printed in white, but not black.
We tried printing in black, with white over the LED, but the color changing function on the printer kept jamming, so we gave up on that.
Is the print in your photo TPU?
Yes the print in the photo is TPU.
Thanks for the info!