Stark Varg MX vs EX fitment plastic

Erwin P

Well-known member
Likes
153
Location
Netherlands
I have a Stark Varg MX. I however need a licence plate holder on the bike to run in certain track. Nothing on the street.
I allready found out from the Stark parts website that the subframe has the same parts number. Do you people know what i actually need to make it fit?

One would think the SEX1-P-RF-05 Homologation license plate holder and maybe SEX1-P-RF-02-B Rear fender would do, but i'm not 100% sure and love to order all i need at once.

Anyone any experience with this?
 

Erwin P

Well-known member
Likes
153
Location
Netherlands
To answer my own question:

The ''SEX1-P-RF-02-B Rear fender'' came in and i mounted it on the Stark MX. In shape it was a perfect fit.

It however missed the mounting for the rear wires of the MX. I drilled a hole to fit the upper mounting and that was all the modifications i needed to make.
The EX has 2 extra mounting points near the rear that the MX lacks, but it's actually more sturdy than i thought and ik would not hesitate to use this as a platholder.

cd7f3da1-2253-4961-89c1-a1c1b9fb598c.jpg

f39a98f5-8079-4d5c-9552-df7ef2216ba2.jpg

27a5c614-0405-4d71-b168-9cc747297f4f.jpg



eece5472-8acb-45f6-a436-6b73e63f80db.jpg


6e33e4eb-af26-4f01-afbf-a019fb24ba24.jpg


95722277-a097-4c59-844b-10892be3b75f.jpg
 

DaveAusNor

Well-known member
Likes
73
Location
Norway
I have a similar question. About MX vs EX plastics. I'd like to get a different colour rear spoiler, but they only list spoilers under MX and not EX bodywork. I asked SAM and Sam said they were different and referred me to a parts list, however I couldn't find any selerate EX spoiler part, only the EX bodywork kit.

I know the EX has a tab at the back of the spoiler that slots into the fender. Does the MX have the same?
 

Erwin P

Well-known member
Likes
153
Location
Netherlands
I'm not sure what you mean?

You would want the red part in my picture right? So the topside?
That is different between both because the MX is missing 2 points where the rear EX fender (the black thing that i added) bolts on to. I know that it fits and works how i put it, but if you add the entire rear numberplate holder i don't think it will do.

I only have this to ride at some tracks that need a plate to be mounted there, the don't need street legal angle etc.
 

UKLee

Well-known member
Likes
85
Location
UK
To answer my own question:

The ''SEX1-P-RF-02-B Rear fender'' came in and i mounted it on the Stark MX. In shape it was a perfect fit.

It however missed the mounting for the rear wires of the MX. I drilled a hole to fit the upper mounting and that was all the modifications i needed to make.
The EX has 2 extra mounting points near the rear that the MX lacks, but it's actually more sturdy than i thought and ik would not hesitate to use this as a platholder.

View attachment 13429

View attachment 13435

View attachment 13430



View attachment 13432


View attachment 13433


View attachment 13434
That will be because all the EX's will have the gen 2 drive train which does not have those cables that the Gen 1 has.
 

DaveAusNor

Well-known member
Likes
73
Location
Norway
I'm not sure what you mean?

You would want the red part in my picture right? So the topside?
That is different between both because the MX is missing 2 points where the rear EX fender (the black thing that i added) bolts on to. I know that it fits and works how i put it, but if you add the entire rear numberplate holder i don't think it will do.

I only have this to ride at some tracks that need a plate to be mounted there, the don't need street legal angle etc.
I mean these pieces. I guess this is where the 2 extra bolts go into on the EX. I think I figured it out tho. The spoiler plastic is mx and ex specific. Its just the way you click through the parts catalogue is a little bit messy at times. It looks nice, but a simple parts list would work better for myself.

20250606_160435.jpg
 
Top Bottom