3D print shroud guards to fill in the ribs

I can donate 2020 Honda CRF shrouds which seem to match the frame lines of the Alta

If you are interested let me know where to send them
 
If someone has access to a scanner, and would be willing, we can scan my shroud design. From there I could probably recreate in fusion 360 pretty accurately. I’m still kicking myself for not taking a copy of my original 3D..

making a mold sure wouldn’t be cheap though..
 
Blatant Moto said:
If someone has access to a scanner, and would be willing, we can scan my shroud design. From there I could probably recreate in fusion 360 pretty accurately. I’m still kicking myself for not taking a copy of my original 3D..

making a mold sure wouldn’t be cheap though..
Click to expand...
@Blatant Moto - We're talking about these shrouds, right? I love this design! Why don't we have Star Trek replicators yet? Somebody in tech support has really dropped the ball, cuz I was really hoping we'd have that tech by now.

1593628782470.png
 
Blatant Moto said:
If someone has access to a scanner, and would be willing, we can scan my shroud design. From there I could probably recreate in fusion 360 pretty accurately. I’m still kicking myself for not taking a copy of my original 3D..

making a mold sure wouldn’t be cheap though..
Click to expand...

Do you have pictures of this?

We can scan it as Long as it’s 1 piece.

molding, well there’s a few CNC machines here, compression mold is easiest to make I would say, shooting the parts, another story

I intend to have the initial ones printed on a large format FDM or objet, it would be nice to have high impact plastic molded, other step for another day. For now we are focused on comfy knees
 
Potatonet said:
Do you have pictures of this?

We can scan it as Long as it’s 1 piece.

molding, well there’s a few CNC machines here, compression mold is easiest to make I would say, shooting the parts, another story

I intend to have the initial ones printed on a large format FDM or objet, it would be nice to have high impact plastic molded, other step for another day. For now we are focused on comfy knees
Click to expand...
C5tor beat me to it. See above. It’s one piece. I’m a little wary about just handing it over or shipping it as it’s the only set and I spent a ton of time on it.. Where are you located?
 
C5tor said:
@Blatant Moto - We're talking about these shrouds, right? I love this design! Why don't we have Star Trek replicators yet? Somebody in tech support has really dropped the ball, cuz I was really hoping we'd have that tech by now.

View attachment 5567
Click to expand...
Blatant Moto said:
C5tor beat me to it. See above. It’s one piece. I’m a little wary about just handing it over or shipping it as it’s the only set and I spent a ton of time on it.. Where are you located?
Click to expand...

Sebastopol, Ca.

I can drive to the bay if it’s down there

or even better you drive it up to us!

that keeps it safe :)
 
Potatonet said:
Sebastopol, Ca.

I can drive to the bay if it’s down there
Click to expand...
Oh dang not far at all
Potatonet said:
Sebastopol, Ca.

I can drive to the bay if it’s down there

or even better you drive it up to us!

that keeps it safe :)
Click to expand...
Oh damn! So close! And I’m jobless! I wouldn’t have a problem heading up there at all. I’m out of town for the next week, but let’s reconnect then.
 
TCMB371 said:
Hmmm. I might be able to make some snap-in inserts, but i'd need to get the measurement really accurate so that it hugs the curves well. Lemme see what i can come up with.
Click to expand...
Let me know when they are ready!
If you can do the middle two fillers first that would solve most of my problems I think.
 
This is super interesting. I have a pair of stock shrouds I'll donate to the effort if you get in a tight. Just need the new ones plus I'll buy an additional pair for bike #2
 
Blatant Moto said:
If someone has access to a scanner, and would be willing, we can scan my shroud design. From there I could probably recreate in fusion 360 pretty accurately. I’m still kicking myself for not taking a copy of my original 3D..

making a mold sure wouldn’t be cheap though..
Click to expand...
If you can recreate them in a CAD software, and also tweak them to be as narrow and close to the frame as possible, this will then be the shrouds that everyone will wan to upgrade to! Then we will find a way to produce them too, I am sure. :giggle:
 
Blatant Moto said:
If someone has access to a scanner, and would be willing, we can scan my shroud design. From there I could probably recreate in fusion 360 pretty accurately. I’m still kicking myself for not taking a copy of my original 3D..

making a mold sure wouldn’t be cheap though..
Click to expand...

i already scaned half the bikes plastics and posted the files
Thinking about making the plastics for alta
Thinking about making the plastics for alta
Thinking about making the plastics for alta
 
Jayfox911 said:
Bump. I need new graphics and want these ribs filled in then get custom graphics to hold the fillers in place. Chop chop 3D printing people ;):p
Click to expand...
I started modeling a fix for this but have gotten busy with work and prepping for a trip I am doing next week. Will hopefully pick up where I left off in a week and a half and print out my first idea of a rib filler. Getting the contours of the shroud to line up is a rather enjoyable modeling challenge.
 
Matt said:
I started modeling a fix for this but have gotten busy with work and prepping for a trip I am doing next week. Will hopefully pick up where I left off in a week and a half and print out my first idea of a rib filler. Getting the contours of the shroud to line up is a rather enjoyable modeling challenge.
Click to expand...
Thank @Matt if it helps I would be satisfied with the middle two ribs filled it. I would also cut out the middle rib between the center two spaces, if needed! :unsure:(y)
 
Anyone thought about using the existing shrouds as a mold and laying up a thin s glass or carbon fiber cover that smooths out the ribs? It wouldn't have to be strong as it wouldn't be structural, just something to cover the ribs when your knees slide over them.
 
You must log in or register to reply here.

Similar threads

revoltlution
3D Print Models
Replies
18
Views
6,609
revoltlution
revoltlution
Scooter584
Shroud screws
Replies
7
Views
3,042
Bionicman
Bionicman
D
Grey front number plate? White or grey fork guards?
Replies
0
Views
616
dustinhorton
D
Back
Top