Search results

This issue is quite serious especially because just on this forum there is more than a person having reported a weird sound and two people will have to change the power unit: apparently the probability to have it is significant. On the other hand: - in the first two years the replacement is...

Yesterday, when I was unloading the bike from the trailer after a trackday, I noticed that the valve stem of the front tyre was very crooked, like 45° from the radial direction that it is supposed to be pointing at, and that the tyre had very little pressure. I was able to inflate it and it held...

I've had a trackday yesterday and I can confirm that it worked properly. When I turn it on I usually see a yellow or sometimes magenta light for maybe a second or two, but then the flashing green light appears. This happened before the update, too, if I recall properly..

Would you say that the bearings were well lubed originally?

How many hours does your bike have? Have you noticed any other problems like play in the countershaft or debris in the old oil when changing it? Have you removed the oil filler cap and inspected the gears with a flashlight? Sorry for the many questions but such a problem is serious.

Hello and welcome. If I have understood correctly, what you have in mind is to find a company which has experience in that kind of expeditions and which can provide you with suitable electric bikes, chargers and whatever you may need to run them on rental; is this correct? Unfortunately I know...

I don’t know for sure since I haven’t counted how many clicks I was out, but the default sttings should be the ones that you can find in this thread.

Here is my situation: • rider's weight in underwear: 74 kg/163 lbs • suspensions setup: 75/80 kg • use: motocross only At the beginning, the suspensions felt stiff to me in every track. Saturday at the track, at 8 hours circa it seemed to me that maybe they had softened a little bit but still...

Ok, so I've just updated my bike. I've tested it by spinning the rear wheel with the throttle on the stand in different maps, by charging it some minutes and by testing it again after having turned the phone off and then on (see post #13). I haven't tested race mode and surely I won't do it...

Ok, so I understand it would be better to listen to it but probably it would be little practical, so I guess we have to use a description. Then, how would you describe the noise? Is it just the normal whirring noise but louder? Does it sound like bearings losing preload and shaking?

Do you have a video about that to share? I tried listening to the noise of my Varg while spinning the rear wheel on the stand and it seems to me that most of the noise comes from the chain. Are you sure this is not your case? Is your chain tension correct?

As far as I've understood from this post, it happened to someone else, too! From my limited knowledge of electronics, it is possible that a faulty update leads the bike to do something which harms the battery, like for example managing the voltage or the state of charge of the cells in the wrong...

Well, after having read post #1 I didn't update the firmware to that version and surely I'm not going to do it now that I've read about your problem. Honestly my bike works properly and unless it becomes necessary for some reasons or they release a newer version, I think I shouldn't update...

So, has anyone tried the Varg updated to this firmware version? Any problems?

Well, I personally prefer precise specifications, too, but to me it sounds too demanding to expect that a company does something like washing a bike multiple times varying parameters like pressure and distance of the nozzle until damage occurs in order to create those specifications. I can't...

Actually the water pressure at a depth of 4.5 feet/1.3 m, which would be enough to submerge a Varg, would be only 0.13 atm/2 PSI and that would be the pressure at the lowest point of the bike; the electronics, placed higher, would be exposed to an even smaller pressure. Let's say that due to...

Some days ago I changed mine and I recorded a video of the oil being lifted by the gears. I was able to see the same thing turning the wheel by hand. I will remember this in case I will need a quick way to verify that the gearbox is not working dry.

That will surely work with an ICE bike with a carburator: I get that the clutch disengages the engine mechanically and, thanks to the kill switch, the spark plug won't ignite any more fuel. Maybe it would have worked with the sportsbike of my example but the rider panicked. On an electric bike...

Although I don't know much about electronics, I think that trying to hack the Varg would be a very bad idea and I will tell you why by reporting to you a story a marshall told me in a supermoto/sportbikes track: One day a customer of the track entered it riding his 1000cc sportsbike whose...

Some days ago I wrote, on this forum, that a power station would have been too expensive and that a generator would have been a more sesnsible choice instead, but I made a small mistake: I didn't check the typical efficiency of a generator. According to a quick search, it seems that, in order to...