Search results

Took another capture with 240V input to the fast charger. Spreadsheet with analysis in google drive folder above. It seems with the EXR firmware I've got, the charge request tops off at 400V, 8A, 3200W (at least at the state-of-charge range I was at) Not sure if the bike will get angry if I...

You might consider keeping everthing in the case. There's actually two things in there. That box in the picture above, which has I guess some power filtering circuits, and the actual Elcon 3.3 kw charger. Sorry if you already knew that, and I'm just re-splaining. Edit: You can kinda see what I'm...

Yah, it's the right part#

Seems like I had an order of magnitude error in my current request/delivering column (buisness as usual). I've cleaned up the formatting in the interp. file, and now the calculated power values seem sane.

I bought this enclosure to replace the one I cut open in my fast charger. I'll report here whether it fits.

I wasn't able to get the lawicel can usb to work with savvycan. Not to say one couldn't, just that I didn't. I'm using the EVTV arduino due, and running the windows 32 bit savvy can on a windows 10 (64 bit) machine. https://store.evtv.me/products/evtvdue2

Included some analysis on google drive folder. "Interp" spreadsheet. Seems like the bike was asking for 400V, and seems to ramp the current request as high as 53 amps before setting back to ~20 amps, then to 10 amps. From observing the charger in the past, I'd guessed that the bike seems to...

Here is a CAN log taken on the bus connecting the my EXR's charging port and the fast charger. During this capture the following events occured. 1. Ignition key enabled, frames begin sending 2. Fast charger AC input is connected. 3. Charging begins, "Charging" displayed on display 4. Ignition...

Awesome, thanks.

Does anyone know which color conductors are which on the high speed charger CAN bus twisted 1.5 pair? Red White Green

Mechanically fits

Souriau 102G1W3 Layout, shell size 10, 3x#16 + 3x#20 See catalog page 26-29 https://www.mouser.com/pdfDocs/Catalog_UTL_Series_US_version_-2.pdf These filters on mouser give the relevant material...

I'll eventually need a cable with the female (charger) side for a project I'm working on. No urgent need, able to charge the bike and everything at the moment. Thanks for the tip on the resistor. The CAN terminating resistor is at the factory charger?

Seems like Souriau UTL line connector. Part# 102G1W3 maybe? Not sure about the 120 Ohm resistor, I'll measure when I get a chance.

Can't find the answer to this on here, so sorry if this is a repeat question. What connector type is the charging port on the E/MXR? Is it proprietary? Is there a source? Anyone happen to have a wiring diagram?