Search results

There is no battery in the key switch. The 9V battery lives in the ACM. That is the only tiny battery that lives in the bike. Phillp check the key switch to see if there was loose contact

MT was meant to be used to look at the state of the bike. For production we used it to program all the devices on the bike, time the motor and also check signals on the bike (there is a tab for that). Latest FW will be the most optimum for customers along with parts like displays.

45 to 50 miles is the limit. Your averaging about 40 miles per hour. For me I used to get from Brisbane to Campbell within 1hr 45min. Audio Books for the win. I had enough juice to be in map 1 till Palo Alto/Sunnyvale and then Map 4 to Campbell. Only had one time I ran out of juice. Had to push...

Not really. That bike was built early in 2018. Last time I saw MX214 it had 4CS suspension(just like the original 17s) and no stickers on the fork guards.

They should be of the current design.

There were issues with the throttle board which caused that part to be moved into the inverter. Early build MX bikes need that throttle. 80 to 90 of the Alta population use the current throttle.

Possibly, but that will require a bit of work of cutting out the throttle board, and reconnecting. I believe the connector on the newer throttles is a JST. Also you may have to lengthen the throttle cable.

As a clarification the throttle you have posted for sale is for the older (MY17) bikes. All SMs and EXs and R based bikes have the throttle board living inside the inverter.

And so do I. They have a SM for a reason...

Or let your friendly former employees know and we can figure something out :)

Careful with those. Sometimes the AER fork won't re-inflate with the pump.

Since the MXR got the foam enclosure compare to the EXR and SM, the display had some "cushion" from any impacts.

Well one of those MXRs looks like the front forks were compressed for a long time. Pump time?

Probably the earlier ones. We did end up properly setting up the VIN configurator to properly send firmware to vehicles in the factory....

FW update that @Judaslefourbe mentioned awhile back updated those maps and firmware correctly.

How Of all the things we wanted.. to play Excite bike would have been awesome! This looks sweet Querlenker, how are you connecting to the main vehicle harness? Pigtail? Spliced straight in?

Replacement PCBA board for the display.

Install the harness yourself - requires you to remove the front cover and pull apart the display.

You will be provided with the address where to ship the broken harness upon the completion of this order.

New display in old case, assembled (Solder out the old board and display, install a new board and display, reprogram/repack) You will be provided with the address where to ship the broken display upon the completion of this order.