Search results

I ran into another complaint today from fellow riders so I developed a new warning label. After one broken nose.

KIDS I already have two domino championships from the men’s league at the park 🏆 🏆 and one for pigeon feeding 🥇

Here’s two from Mammoth MX 2018

I know Alta is a small company but it’s getting hard to keep promoting they’re bikes when customer service doesn’t take real life (in the field) problems seriously. I guess they feel if it works in the computer program, then they feel it’s good to go. One of the main reasons I bought the MXR was...

Riding in 100+ degrees the bike gets pulled from one side to the other. ⚡️ I think it’s acting like a Lightning Bolt? ⚡️ Might have to add a air stabilizer so it doesn’t wiggle around in the air.

I found out at Mammoth mx that the chain was hitting the rear of the slider next to the bolt with a piece of tape. So I put in a small rubber bumper next to the bolt to help support the slider.

@Judaslefourbe can you pass this along to the right person? They need a block back by the bottom rear mounting bolt that’s were the support is needed. The chain hits the slider there.

Great video (report) it was nice to hear first hand.

When changing your grips don’t use to much grip glue on the throttle side. Will make the throttle a little sticky.

Looks like a lot of fun👍

Powerlift stand. No lifting 👍

Yes it comes on when battery gets down to 20% it starts limiting. I believe the computer reads the battery level at each start up and sets it to a new 20% level. I found that the limiting mode doesn’t last long at race pace maybe 4-5 minuets. Your race range 1/3 battery is around what I got...

Was watching Chad Reeds interview Sounds like he looking for a ride for next years Supercross and wants it to be fun again. A MXR would fit the bill 👍 He would be great exposure for Alta 👍

Higher pegs. More ground clearance.

@Scooter584 One more must have is a skid plate and you might want to change the gearing depending on what you riding on. I went to a 14t counter for most SoCal tracks.

Welcome be prepared to answer a lot of questions at the track.👌 As Philip said Fasst rear brake return spring a must. I put rubber bumper in chain slider seems to be holding up. You can see in the chain slider post. Get the suspension done ✅ ⚡️Grip it and Rip it⚡️

Thanks @Judaslefourbe that’s what I was thinking I might be figuring these things out 😂😂😂 NOT!!!

A more aggressive rider won’t feel the regen because he or she would have the throttle open so the regen won’t be working.

It’s nice that we have two or three Alta workers on the site now? They will be able to get some real in the field feed back and we can get answers on our questions now.👍

I would wait until there’s a dealer is fairly close by in case you need any service work done. All warranty work is done through a dealership.