Search results

You most likely won’t even notice the 6.6 spring difference with the weight of the Bike. It will be good on the track 👍

I run 157 fork pressure. Put a O ring or a zip tie on the fork tube ride some laps and see how far down your suspension goes. Adjust the air pressure a pound at a time up or down until you have about 1”to 1-1/2” left. That will be you’re right air pressure for you. Then you can adjust the...

I’am at 215 pounds and I run a 6.4 spring with 10 mm preload which gives me a 96mm sag on my N2Dirt supension I think a 6.6 spring will be good for your weight if you ride Moto. Trial riding a 6.4. The MXR has a different ratio in the linkage because of the wight of the bike so the standard...

You guys obviously never rode a CZ.

Whymee, The power lift stands are amazing 👍 No twisting of your back when lifting. After using the power lift you will be cussing anytime you have to lift your bike on a conventional stand. I actually made up a cable leash to lock it down if Iat a shady track. Let me know if you are...

Last weekend I rode a 19 Kawasaki 450 and after going back to my MXR the chatter bumps or non-existent.👍 As stated previously post, I do not think you would be making a wrong decision going with Brian N2dirt.👍 Tell him Fog or Fod sent you. Thanks

Do not know we’re the Total Harmonic Distortion is at.Sorry. I know mine has worked very well for the price except at altitude. The predator generator is a Chinese knock off a Honda.

Parking lot sale. Time to pickup your generator not going to be cheaper.

This weekend

As with any generator meter the output of the plugs. My Harbor Freight 4000 12 volt plug was putting out 17.2 volts.

Ben what state do you live in? I believe Beverly Hills Motorcycles in Los Angeles has one on the floor

Welcome, Don’t forget to rejet for the altitude in Colorado 👍⚡️👍

Try going to 95 sag and push your fork tubes down in the clamps. That will rise the ground clearance.

I believe the MPH is base on engine RPM not actual wheel speed. So the console MPH will read the same with different final gear ratios.

If anyone looking for a Alta in the Los Angeles area I highly recommend Beverly Hills Motorcycles. Had them update my firmware today and it was a pleasure dealing with them. No bullshit. The owner John Sullivan was a very pleasant and Fernando in service was top notch. Beverly Hills...

Meter all the plugs for the voltage. My 12 volt plug was putting out 17.2 volts.

Get both all you will be all set ⚡️👍⚡️

Mark911 What does the close cooling system run thru? Is it just the electronics? I was thinking that if we could add a external radiator that would help with the cooling.

I think the sprocket is on the wrong side so I don’t think it will work. Send ime the wheel and I’ll see if I can turn it around. Very nice looking hope it works on your new bike.

Sounds like a losing proposition since there’s not a lot of Alta in Germany. I guess the KTM Freeride guys will have a nice park to ride in. I always thought that a old warehouse would be an ideal place to have Alta rentals. We have indoor Electric go cart rental here in California.