Display got run over Perris flat track

[gpowell68Y]

Turn 1 main event
2nd place rider checked up on me and down i went
2 racers behind missed me but not my Alta
bars can be replaced but where can i get display fixed or replaced?

 

[C5tor]

Good thing it missed you! Talk to @Rashid510 about display parts.

Is this still a valid product, @Rashid510?

New display in old case, assembled

 

[Rashid510]

Good thing it missed you! Talk to @Rashid510 about display parts.

Is this still a valid product, @Rashid510?

New display in old case, assembled

It is available. Im controlling demand because right now the supplier is constrained due to COVID. @gpowell68Y PM me for what you need. I might be able to repair the original display

 

[Bloak]

Stock handlebars?

 

[schwankl]

Stock handlebars?

$54 and free shipping on ebay: Alta Motors HANDLEBAR, TAPERED 3200334-01 | eBay

 

[Jayfox911]

I have been wondering...does the bike still turn on and move when the display is crushed/broken?

 

[Rashid510]

I have been wondering...does the bike still turn on and move when the display is crushed/broken?

Unfortunately no, the display is part of the CAN loop when the ACM confirms all signals. A lonnng term project is some sort of CAN replacement which can spoof the ACM.

 

[leeo45]

I have been wondering...does the bike still turn on and move when the display is crushed/broken?

Unfortunately no, the display is part of the CAN loop when the ACM confirms all signals. ..... (snip)

This is the reason so many of us have ALTA Vaults (Link) or some other display protection, or have relocated our displays to a safer yet less visible location. There are several threads describing some of the options to mitigate the dead display => dead bike situation. And very fortunately, @Rashid510 is providing several alternatives should the worst occur.

 

[gpowell68Y]

Actually the Alta stayed online with the damaged display and ran - tho they wouldn't let me go back to the restart!

 

[C5tor]

Actually the Alta stayed online with the damaged display and ran - tho they wouldn't let me go back to the restart!

I'm sure the busted handlebar had nothing to do with it!

 

[gpowell68Y]

Thank you Rashid510 for getting 68Y back on track for Round4 Perris flat track with a repaired display!
Spun out in my heat race and had to restart from the penalty line. Made my way to 6th and started the Main event from the far outside. Got a great start by rolling the throttle on slowly then pinned it.
Much better result. Podium finish!
Round 5 October 4th!

 

[Flynryan]

This is the reason so many of us have ALTA Vaults (Link) or some other display protection, or have relocated our displays to a safer yet less visible location. There are several threads describing some of the options to mitigate the dead display => dead bike situation. And very fortunately, @Rashid510 is providing several alternatives should the worst occur.

I'd like to get the display protector for mine. Is it hard to install? Just did the brake support last week.

 

[leeo45]

I'd like to get the display protector for mine. Is it hard to install? Just did the brake support last week.

Nope, it is a very simple installation. Maybe 15 to 30 minutes of effort depending on how fast you work and whether you have an EX or MX.

Here is a link to the AOF thread with all of the pictures and installation info: ALTA Vault Thread