Start / Stop Switch Connector

[admiralwoodlau]

Heya guys,

Had a little bit of an off on our bike, and the connector that joint the main wiring look to the Start / Stop Switch was bist Open.

Both sections of cable have different colour wires, does anyone have a photo of their loom I can use to match when I replace the connector

Cheers, James

 

[Rashid510]

Heya guys,

Had a little bit of an off on our bike, and the connector that joint the main wiring look to the Start / Stop Switch was bist Open.

Both sections of cable have different colour wires, does anyone have a photo of their loom I can use to match when I replace the connector

Cheers, James

View attachment 9995

I can sort of make it out, but there might be some sleeving on the wires on the left? I can pull up the wiring harness for the start/stop tonight.

 

[Fog 25]

Heya guys,

Had a little bit of an off on our bike, and the connector that joint the main wiring look to the Start / Stop Switch was bist Open.

Both sections of cable have different colour wires, does anyone have a photo of their loom I can use to match when I replace the connector

Cheers, James

View attachment 9995

Looks like the top black wire got cut at the insulation.

 

[admiralwoodlau]

I can sort of make it out, but there might be some sleeving on the wires on the left? I can pull up the wiring harness for the start/stop tonight.

That would be great, if you had that to hand

Cheers, James

 

[Rashid510]

That would be great, if you had that to hand

Cheers, James

So this is a stock harness from my spares, the wiring is continious through the entire loom:



What that looks like is the connector (see the beige conn at the end) between the harness main and the switchgear has been compromised/damaged.

So that being said - color codes to match:

 

[Oded]

Valuable information. Thanks Rashid.