XTRIG 22mm KTM Compatible?

[Foss]

Hey guys, as the title states, just seeing if the KTM XTRIG 22mm setup will work with the Varg? My only thing is the mounting points for the fenders.

 

[Philip]

I do not know about the bearings. But I know you'd have to shim the bottom fork leg clamps because KYB SSS fork legs are thinner than WP 48AER legs. I have done it before, you can order shim stock from McMaster.com. It's pink, IIRC 0.015" thick, but you should verify this yourself.

 

[Foss]

Yea there may be a lot of parting together to get it to work. Billy at Luxon is taking forever

 

[Varg118]

FYI if you didn’t see yet, XTrig makes these for Stark now. I have a set waiting to install…
You have to run the FlexFix clamps to use the phone cradle on top. They don’t show or explain that, but that’s what I’ve come up with anyway. Obviously you can run without the phone as well.

 

[Luxon MX]

Yea there may be a lot of parting together to get it to work. Billy at Luxon is taking forever

Sorry, lots on our plate! Bar mounts and steering stem are complete, prototyping clamps now.

 

[Foss]

Sorry, lots on our plate! Bar mounts and steering stem are complete, prototyping clamps now.

It’s all good, I know quality work takes time, wasn’t trying to bash… just my bike is starving for your triple clamps in blue…

 

[Foss]

Sorry, lots on our plate! Bar mounts and steering stem are complete, prototyping clamps now.

@Luxon MX , you have any projection when these triple clamps will be available? Also A-Kit compatible for KYB?

Thanks!

 

[Luxon MX]

@Luxon MX , you have any projection when these triple clamps will be available? Also A-Kit compatible for KYB?

Thanks!

Nothing firm yet, 1-2 months or so. And unless your A-kit is really old, it is the same size as standard KYB, so no issues there!