Foss
Well-known member
- Likes
- 154
- Location
- Vestal, NY
Hey guys, as the title states, just seeing if the KTM XTRIG 22mm setup will work with the Varg? My only thing is the mounting points for the fenders.
XTRIG 22mm KTM Compatible?
- Thread starter Foss
- Start date
- Likes
- 4,252
- Location
- Lake Havasu City, AZ
I do not know about the bearings. But I know you'd have to shim the bottom fork leg clamps because KYB SSS fork legs are thinner than WP 48AER legs. I have done it before, you can order shim stock from McMaster.com. It's pink, IIRC 0.015" thick, but you should verify this yourself.
Foss
Well-known member
- Likes
- 154
- Location
- Vestal, NY
Yea there may be a lot of parting together to get it to work. Billy at Luxon is taking forever 
Varg118
New member
- Likes
- 0
- Location
- Eagle, Idaho
FYI if you didn’t see yet, XTrig makes these for Stark now. I have a set waiting to install…
You have to run the FlexFix clamps to use the phone cradle on top. They don’t show or explain that, but that’s what I’ve come up with anyway. Obviously you can run without the phone as well.
You have to run the FlexFix clamps to use the phone cradle on top. They don’t show or explain that, but that’s what I’ve come up with anyway. Obviously you can run without the phone as well.
Luxon MX
Member
- Likes
- 5
- Location
- San Diego, CA
Sorry, lots on our plate! Bar mounts and steering stem are complete, prototyping clamps now.Yea there may be a lot of parting together to get it to work. Billy at Luxon is taking forever
Foss
Well-known member
- Likes
- 154
- Location
- Vestal, NY
It’s all good, I know quality work takes time, wasn’t trying to bash… just my bike is starving for your triple clamps in blue…
Foss
Well-known member
- Likes
- 154
- Location
- Vestal, NY
@Luxon MX , you have any projection when these triple clamps will be available? Also A-Kit compatible for KYB?
Thanks!
Luxon MX
Member
- Likes
- 5
- Location
- San Diego, CA
Nothing firm yet, 1-2 months or so. And unless your A-kit is really old, it is the same size as standard KYB, so no issues there!
Foss
Well-known member
- Likes
- 154
- Location
- Vestal, NY
Just checking in with you to see if any progress has been made with these triple clamps, thanks!
Luxon MX
Member
- Likes
- 5
- Location
- San Diego, CA
Not yet, unfortunately. We've been slammed the last few months. Hoping to get some "free" time once supercross starts up to get these clamps going!
Similar threads
| Thread starter | Title | Forum | Replies | Date |
|---|---|---|---|---|
| J | Xtrig PreLoad Adjuster for rear shock | Suspension | 6 | |
| M | XTRIG PHDS on Varg | Steering, Controls, Seats, Footpegs | 8 | |
| B | 2025 KTM Freeride E | Production Intent e-Motorcycles | 49 |