Foss
Stark SME
- Likes
- 216
- Location
- Vestal, NY
Hey guys, as the title states, just seeing if the KTM XTRIG 22mm setup will work with the Varg? My only thing is the mounting points for the fenders.
XTRIG 22mm KTM Compatible?
- Thread starter Foss
- Start date
- Likes
- 4,448
- Location
- Lake Havasu City, AZ
I do not know about the bearings. But I know you'd have to shim the bottom fork leg clamps because KYB SSS fork legs are thinner than WP 48AER legs. I have done it before, you can order shim stock from McMaster.com. It's pink, IIRC 0.015" thick, but you should verify this yourself.
Foss
Stark SME
- Likes
- 216
- Location
- Vestal, NY
Yea there may be a lot of parting together to get it to work. Billy at Luxon is taking forever 
Varg118
New member
- Likes
- 1
- Location
- Eagle, Idaho
FYI if you didn’t see yet, XTrig makes these for Stark now. I have a set waiting to install…
You have to run the FlexFix clamps to use the phone cradle on top. They don’t show or explain that, but that’s what I’ve come up with anyway. Obviously you can run without the phone as well.
You have to run the FlexFix clamps to use the phone cradle on top. They don’t show or explain that, but that’s what I’ve come up with anyway. Obviously you can run without the phone as well.
Luxon MX
Member
- Likes
- 10
- Location
- San Diego, CA
Sorry, lots on our plate! Bar mounts and steering stem are complete, prototyping clamps now.Yea there may be a lot of parting together to get it to work. Billy at Luxon is taking forever
Foss
Stark SME
- Likes
- 216
- Location
- Vestal, NY
It’s all good, I know quality work takes time, wasn’t trying to bash… just my bike is starving for your triple clamps in blue…
Foss
Stark SME
- Likes
- 216
- Location
- Vestal, NY
@Luxon MX , you have any projection when these triple clamps will be available? Also A-Kit compatible for KYB?
Thanks!
Luxon MX
Member
- Likes
- 10
- Location
- San Diego, CA
Nothing firm yet, 1-2 months or so. And unless your A-kit is really old, it is the same size as standard KYB, so no issues there!
Foss
Stark SME
- Likes
- 216
- Location
- Vestal, NY
Just checking in with you to see if any progress has been made with these triple clamps, thanks!
Luxon MX
Member
- Likes
- 10
- Location
- San Diego, CA
Not yet, unfortunately. We've been slammed the last few months. Hoping to get some "free" time once supercross starts up to get these clamps going!
Miller973
Member
- Likes
- 10
- Location
- Brownsville, TX
I got them to work. Xtrigs off of my 2023 450 SX-F
TokyoMX
New member
- Likes
- 3
- Location
- Tokyo, Japan
Hate to bother you, but..... Luxson Stark clamps still in progress?
Luxon MX
Member
- Likes
- 10
- Location
- San Diego, CA
Sorry, I never got an alert about your reply. I just replied on the other thread, though:
New Stark Varg products are coming - Luxon Triple Clamps
Cool moto engineering video. Thanks, @TCMB371 ! Luxon Triple Clamps
electricdirtriders.com
dieselchrisel
New member
- Likes
- 0
- Location
- Austria
hi - do you know if the WP Stanchoins have the same diameter as KYBs? (they both have 48mm lowers), the lower headset bearing is the same on the KTM and on the Stark? how did you fit the fender and the number plate - would love to have some more details - best regards chris
Miller973
Member
- Likes
- 10
- Location
- Brownsville, TX
They are not the same diameter as KYB. Stock clamps will not work. I did custom mounts for the fender and front number plate. There are a few different geometries that I've seen for x trig clamps, I have one of each. I did a weld on solution on one bike, and 3d printed bolt on parts for the other. This is the latest build I did
drehwurm68
Well-known member
- Likes
- 60
- Location
- Austria
No, they are different. But you can use KYB outer tubes with standard WP 48mm lower tubes and cartridges. Xact Pro (ConeValve) cartridges will not fit though - different thread pitch.
Michael
Erwin P
Well-known member
- Likes
- 385
- Location
- Netherlands
The lower clamp is the same. The upper is 1mm wider from WP.
